Subversion Repositories configs

#! /bin/sh

### BEGIN INIT INFO

# Provides: kdump

# Default-Start:  3 4 5

# Default-Stop: 0 1 6

# Require-Start: $network $local_fs $remote_fs

# Short-Description: start and stop kdump crash recovery service

# Description:  The kdump init script provides the support necessary for

#		loading a kdump kernel into memory at system bootup time,

#		and for copying away a vmcore at system panic time.

### END INIT INFO

#  Copyright 2005 Red Hat, Inc.

#

#  Author:  Jeff Moyer <jmoyer@redhat.com>

# Source function library.

. /etc/init.d/functions

KEXEC=/sbin/kexec

# Will be different for ia64, for example.  For now, that architecture isn't

# supported.  Code needs to be added here when we do.

BOOTDIR="/boot"

KDUMP_KERNELVER=""

KDUMP_COMMANDLINE=""

KDUMP_IDE_NOPROBE_COMMANDLINE=""

KEXEC_ARGS=""

KDUMP_CONFIG_FILE="/etc/kdump.conf"

MEM_RESERVED=""

MKDUMPRD_ARGS=""

CLUSTER_CONFIG_FILE="/etc/cluster/cluster.conf"

FENCE_KDUMP_CONFIG="/etc/sysconfig/fence_kdump"

SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"

#kdump shall be the default dump mode

DEFAULT_DUMP_MODE="kdump"

LOGGER="/usr/bin/logger -p info -t kdump"

standard_kexec_args="-p"

if [ -f /etc/sysconfig/kdump ]; then

	. /etc/sysconfig/kdump

fi

function single_instance_lock()

{

	exec 9>/var/lock/kdump

	flock 9

}

determine_dump_mode()

{

	# Check if firmware-assisted dump is enabled

	# if yes, set the dump mode as fadump and source

	# fadump related functions

	fadump_enabled_sys_node="/sys/kernel/fadump_enabled"

	if [ -f $fadump_enabled_sys_node ]; then

		rc=`cat $fadump_enabled_sys_node`

		if [ $rc -eq 1 ]; then

			echo "kdump: dump mode is fadump"

			DEFAULT_DUMP_MODE="fadump"

			. /etc/init.d/fadump-functions

		fi

	fi

}

# remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>]

# Remove a list of kernel parameters from a given kernel cmdline and print the result.

# For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists.

function remove_cmdline_param()

{

	local cmdline=$1

	shift

	for arg in $@; do

		cmdline=`echo $cmdline | \

			 sed -e "s/\b$arg=[^ ]*\b//g" \

			     -e "s/\b$arg\b//g"`

	done

	echo $cmdline

}

function in_xen_pv_guest()

{

	grep -q 'xen-percpu-virq  *timer0' /proc/interrupts

}

function in_xen_hvm_guest()

{

	grep -q "xen" /sys/hypervisor/type >& /dev/null && ! grep -q 'xen-percpu-virq  *timer0' /proc/interrupts

}

function check_xen_hvm_nopv_premkdumprd()

{

	if in_xen_hvm_guest; then

		if grep -q "xen_.*front" /proc/modules; then

			return 1

		fi

	fi

}

function save_kernel_logs()

{

	local _path=$1

	mkdir -p $_path

	if [ ! -f /sbin/vmcore-dmesg ];then

		$LOGGER "Skipping saving vmcore-dmesg.txt. File /sbin/vmcore-dmesg is not present"

		return;

	fi

	echo "kdump: saving vmcore-dmesg.txt to $_path"

	$LOGGER "saving vmcore-dmesg.txt to $_path"

	/sbin/vmcore-dmesg /proc/vmcore > $_path/vmcore-dmesg-incomplete.txt

	if [ $? == 0 ]; then

		mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt

		echo "kdump: saved vmcore-dmesg.txt to $_path"

		$LOGGER "saved vmcore-dmesg.txt to $_path"

	else

		echo "kdump: failed to save vmcore-dmesg.txt to $_path"

		$LOGGER "failed to save vmcore-dmesg.txt to $_path"

	fi

}

#

# This function returns the "initial apicid" of the

# boot cpu (cpu 0) if present.

#

function get_bootcpu_initial_apicid()

{

    awk '                                                       \

	BEGIN { CPU = "-1"; }                                   \

	$1=="processor" && $2==":"      { CPU = $NF; }          \

	CPU=="0" && /initial apicid/    { print $NF; }          \

	'                                                       \

	/proc/cpuinfo

}

#

# This function appends argument "$2=$3" to string ($1) if not already present.

#

function append_cmdline()

{

    local cmdline=$1

    local newstr=${cmdline/$2/""}

    # unchanged str implies argument wasn't there

    if [ "$cmdline" == "$newstr" ]; then

        cmdline="${cmdline} ${2}=${3}"

    fi

    echo $cmdline

}

# This function performs a series of edits on the command line

function prepare_cmdline()

{

	local cmdline;

	if [ -z "$KDUMP_COMMANDLINE" ]; then

		cmdline=`cat /proc/cmdline`

	else

		cmdline=${KDUMP_COMMANDLINE}

	fi

	cmdline=`remove_cmdline_param "$cmdline" crashkernel mem hugepages hugepagesz`

	cmdline="${cmdline} ${KDUMP_COMMANDLINE_APPEND}"

	avoid_cdrom_drive

	KDUMP_COMMANDLINE="${KDUMP_COMMANDLINE} ${KDUMP_IDE_NOPROBE_COMMANDLINE}"

	local id=`get_bootcpu_initial_apicid`

	if [ ! -z ${id} ] ; then

		cmdline=`append_cmdline "${cmdline}" disable_cpu_apicid ${id}`

	fi

	echo $cmdline

}

function save_core()

{

	local kdump_path

	kdump_path=`grep ^path $KDUMP_CONFIG_FILE | cut -d' '  -f2-`

	if [ -z "$kdump_path" ]; then

		coredir="/var/crash/127.0.0.1-`date +"%Y-%m-%d-%H:%M"`"

	else

		coredir="${kdump_path}/127.0.0.1-`date +"%Y-%m-%d-%H:%M"`"

	fi

	mkdir -p $coredir

	save_kernel_logs "${coredir}"

	/usr/sbin/makedumpfile -c --message-level 1 -d 31 /proc/vmcore $coredir/vmcore-incomplete

	if [ $? == 0 ]; then

		mv $coredir/vmcore-incomplete $coredir/vmcore

		$LOGGER "saved a vmcore to $coredir"

	else

		$LOGGER "failed to save a vmcore to $coredir"

	fi

}

function check_kdump_config()

{

	local modified_files=""

	local force_rebuild=0

	MKDUMPRD="/sbin/mkdumprd -d -f $MKDUMPRD_ARGS"

	force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE | cut -d' '  -f2`

	if [ -n "$force_rebuild" ] && [ "$force_rebuild" -ne 0 ]

	then

                modified_files="force_rebuild"

	fi

	if [ -z "$KDUMP_KERNELVER" ]; then

		local running_kernel=`uname -r`

		kdump_kver=`echo $running_kernel | sed 's/smp//g'`

	else

		kdump_kver=$KDUMP_KERNELVER

	fi

	kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"

	kdump_initrd="${KDUMP_BOOTDIR}/initrd-${kdump_kver}kdump.img"

	if [ ! -f $kdump_kernel ]; then

		echo -n "No kdump kernel image found."; warning; echo

		echo "Tried to locate ${kdump_kernel}"

		return 0

	fi

	if [ ! -f $kdump_initrd ]; then

		echo  -n "No kdump initial ramdisk found."; warning; echo

		if ! check_xen_hvm_nopv_premkdumprd; then

			echo "hvm guest with pv drivers is not supported."

			exit 1

		fi

		echo "Rebuilding $kdump_initrd"

		$MKDUMPRD $kdump_initrd $kdump_kver

		if [ $? != 0 ]; then

			echo "Failed to run mkdumprd"

			$LOGGER "mkdumprd: failed to make kdump initrd"

			rm -f $kdump_initrd

			exit 1

		fi

		return 0

	fi

	if [ -z "$modified_files" ]

	then

		#check to see if config file or kdump post has been modified

		#since last build of the image file

		image_time=`stat -c "%Y" $kdump_initrd`

		EXTRA_FILES=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\  -f2`

		CHECK_FILE=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\  -f2`

		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"

		CHECK_FILE=`grep ^extra_modules $KDUMP_CONFIG_FILE | cut -d\  -f2-`

		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"

		CHECK_FILE=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\  -f2-`

		EXTRA_FILES="$EXTRA_FILES $CHECK_FILE"

		FORCE_REBUILD=`grep ^extra_modules $KDUMP_CONFIG_FILE`

		files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_FILES"

		# changes in CLUSTER_CONFIG_FILE should be monitored only if fence_kdump

		# is not configured using fence_kdump_nodes option in /etc/kdump.conf

		# and fence_kdump is configured in Pacemaker cluster

		if ! grep -q ^fence_kdump_nodes /etc/kdump.conf \

			&& [ -f "$CLUSTER_CONFIG_FILE" ] \

			&& grep -q fence_kdump "$CLUSTER_CONFIG_FILE"

		then

		    files="$files $CLUSTER_CONFIG_FILE"

		    if [ -f "$FENCE_KDUMP_CONFIG" ]; then

			files="$files $FENCE_KDUMP_CONFIG"

		    fi

		fi

		for file in $files; do

			time_stamp=0

			if [ -f "$file" ]; then

				time_stamp=`stat -c "%Y" $file`

			else

				modified_files="$modified_files $file"

				continue

			fi

			if [ "$time_stamp" -gt "$image_time" ]; then

				modified_files="$modified_files $file"

			fi

		done

	fi

        if [ -n "$FORCE_REBUILD" -a "$modified_files"!=" " ]

        then

                modified_files="force_rebuild"

        fi

        if [ -n "$modified_files" -a "$modified_files"!=" " ]; then

                if [ "$modified_files" != "force_rebuild" ]

                then

                        echo "Detected change(s) the following file(s):"

                        echo -n "  "; echo "$modified_files" | sed 's/\s/\n  /g'

                fi

		if ! check_xen_hvm_nopv_premkdumprd; then

			echo "hvm guest with pv drivers is not supported."

			exit 1

		fi

                echo "Rebuilding $kdump_initrd"

		$MKDUMPRD $kdump_initrd $kdump_kver

                if [ $? != 0 ]; then

                        echo "Failed to run mkdumprd"

                        $LOGGER "mkdumprd: failed to make kdump initrd"

			rm -f $kdump_initrd

                        return 1

                fi

        fi

	#double check the xen_*front modules are not included for xen hvm

	if in_xen_hvm_guest; then

		if $(lsinitrd $kdump_initrd|grep -q "xen_.*front.ko"); then

			echo "Found xen pv drivers in kdump initrd"

			exit 1

		fi

	fi

        return 0

}

function check_config()

{

	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then

		check_fadump_config

	else

		check_kdump_config

	fi

	return $?

}

# This function check iomem and determines if we have more than

# 4GB of ram available. Returns 1 if we do, 0 if we dont

function need_64bit_headers()

{

    return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \

    print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'`

}

function avoid_cdrom_drive()

{

	local DRIVE=""

	local MEDIA=""

	local IDE_DRIVES=(`echo hd{a,b,c,d}`)

	local COUNTER="0"

	for DRIVE in ${IDE_DRIVES[@]}

	do

		if ! $(echo "$KDUMP_COMMANDLINE" |grep -q "$DRIVE=");then

			if [ -f /proc/ide/$DRIVE/media ];then

				MEDIA=$(cat /proc/ide/$DRIVE/media)

				if [ x"$MEDIA" == x"cdrom" ]; then

					KDUMP_IDE_NOPROBE_COMMANDLINE="$KDUMP_IDE_NOPROBE_COMMANDLINE $DRIVE=cdrom"

					COUNTER=$(($COUNTER+1))

				fi

			fi

		else

			KDUMP_IDE_NOPROBE_COMMANDLINE="$KDUMP_IDE_NOPROBE_COMMANDLINE $DRIVE=noprobe"

		fi

	done

	# We don't find cdrom drive.

	if [ $COUNTER -eq 0 ]; then

		KDUMP_IDE_NOPROBE_COMMANDLINE=""

	fi

}

function check_kernel_parameter()

{

	if [ -z "$KDUMP_COMMANDLINE" ]

	then

		KDUMP_COMMANDLINE=`cat /proc/cmdline`

	fi

	MEM_RESERVED=`cat /sys/kernel/kexec_crash_size`

	if [ $MEM_RESERVED -eq 0 ]

	then

		return 1

	else

		return 0

	fi

}

# Load the kdump kernel specified in /etc/sysconfig/kdump

# If none is specified, try to load a kdump kernel with the same version

# as the currently running kernel.

function load_kdump()

{

	ARCH=`uname -m`

	# Get the approx amount of ram the kernel is using in Kb

	KMEMINUSE=`awk '/Slab:.*/ {print $2}' /proc/meminfo`

	# Convert the reserved ram amount to Kb

	MEM_RESERVED=`dc -e"$MEM_RESERVED 1024 / p"`

	# Take 70% of the reserved value rounding up to the nearest integer

	MEM_RESERVED=`dc -e"$MEM_RESERVED .7 * 10 * 10 / p"`

	#On x86, we are using nr_cpus=1, so the following check is not necessary.

	if [ "$ARCH" != "i686" -a "$ARCH" != "i386" -a "$ARCH" != "x86_64" ]

	then

		#Check if the KMEMINUSE is greater than MEM_RESERVED

		# This indicates that the currently runnign kernel is using

		# 70% of the amount of memory that we have reserved for kdump

		# we should issue a warning here indicating that the user may

		# want to increase the amount of reserved ram on the system

		if [ $KMEMINUSE -gt $MEM_RESERVED ]

		then

			echo -n "Your running kernel is using more than 70% of the amount of space you reserved for kdump, you should consider increasing your crashkernel reservation"

			warning

			echo

		fi

	fi

	if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ]

	then

		need_64bit_headers

		if [ $? == 1 ]

		then

			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf32-core-headers`

			if [ -n "$FOUND_ELF_ARGS" ]

			then

				echo -n "Warning: elf32-core-headers overrides correct elf64 setting"

				warning

				echo

			else

				KEXEC_ARGS="$KEXEC_ARGS --elf64-core-headers"

			fi

		else

			FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf64-core-headers`

			if [ -z "$FOUND_ELF_ARGS" ]

			then

				KEXEC_ARGS="$KEXEC_ARGS --elf32-core-headers"

			fi

		fi

	fi

	if [ -f /sys/firmware/efi/systab ]

	then

		if grep -q '^ACPI20=' /sys/firmware/efi/systab

		then

			acpi_addr=$(awk -F'=' '/^ACPI20=/ {print $2}' /sys/firmware/efi/systab)

		else

			acpi_addr=$(awk -F'=' '/^ACPI=/ {print $2}' /sys/firmware/efi/systab)

		fi

		KDUMP_COMMANDLINE="$KDUMP_COMMANDLINE noefi acpi_rsdp=$acpi_addr"

	fi

	if echo "$KDUMP_COMMANDLINE_APPEND" | grep -q nr_cpus;

	then

		ver=`uname -r`

		maj=`echo $ver | cut -d'-' -f1`

		min=`echo $ver | cut -d'-' -f2`

		min=${min%%.*}

		if [ "$maj" = "2.6.32" ] && [ $min -lt 171 ]

		then

			echo "Your kernel is old, please use maxcpus=1 instead of nr_cpus=1"

			return 1

		fi

	fi

	KDUMP_COMMANDLINE=`prepare_cmdline`

	if ! grep -q /sys/kernel/debug /proc/mounts;

	then

		mount -t debugfs debug /sys/kernel/debug

		MNTDEBUG=/sys/kernel/debug

	fi

	$KEXEC $KEXEC_ARGS $standard_kexec_args \

		--command-line="$KDUMP_COMMANDLINE" \

		--initrd=$kdump_initrd $kdump_kernel 2>/dev/null

	if [ $? == 0 ]; then

		umount $MNTDEBUG 2>/dev/null

		$LOGGER "kexec: loaded kdump kernel"

		return 0

	else

		umount $MNTDEBUG 2>/dev/null

		$LOGGER "kexec: failed to load kdump kernel"

		return 1

	fi

}

function propagate_ssh_key()

{

	while read config_opt config_val; do

		case "$config_opt" in

		sshkey)

			SSH_KEY_LOCATION="$config_val"

			;;

		*)

			;;

		esac

	done < $KDUMP_CONFIG_FILE

	local KEYFILE=$SSH_KEY_LOCATION

	local errmsg="Failed to propagate ssh key"

	#make sure they've configured kdump.conf for ssh dumps

	local SSH_TARGET=`awk '/^\ *net.*@.*$/ {print $0}' $KDUMP_CONFIG_FILE`

	[ -z "$SSH_TARGET" ] && SSH_TARGET=`awk '/^\ *ssh.*@.*$/ {print $0}' $KDUMP_CONFIG_FILE`

	if [ -z "$SSH_TARGET" ]; then

		echo "No ssh config specified in $KDUMP_CONFIG_FILE.  Can't propagate"

		$LOGGER "$errmsg, no ssh config specified in $KDUMP_CONFIG_FILE"

		exit 1

	fi

	#Check to see if we already created key, if not, create it.

	if [ -f $KEYFILE ]; then

		echo "Using existing keys..."

	else

		echo -n "Generating new ssh keys... "

		/usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null

		echo "done."

	fi

	#now find the target ssh user and server to contact.

	SSH_USER=`echo $SSH_TARGET | cut -d\  -f2 | cut -d@ -f1`

	SSH_SERVER=`echo $SSH_TARGET | sed -e's/\(.*@\)\(.*$\)/\2/'`

	#now send the found key to the found server

	ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER &>/dev/null

	RET=$?

	if [ $RET == 0 ]; then

		echo $KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER

		$LOGGER "propagated ssh key (ssh server: $SSH_SERVER)"

		return 0

	else

		echo $KEYFILE failed in transfer to $SSH_SERVER

		$LOGGER "$errmsg, unable to transfer $KEYFILE to $SSH_SERVER"

		exit 1

	fi

}

function status()

{

	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then

		check_current_fadump_status

		return $?

	fi

	if [ ! -e /sys/kernel/kexec_crash_loaded ]

	then

		return 2

	fi

	if in_xen_pv_guest; then

		return 2

	elif in_xen_hvm_guest && ! grep -q -e xen_emul_unplug=never -e xen_emul_unplug=unnecessary /proc/cmdline; then

		echo 'kdump only supported on xen hvm guests booted with xen_emul_unplug=never or xen_emul_unplug=unnecessary'

		return 2

	fi

	rc=`cat /sys/kernel/kexec_crash_loaded`

	if [ $rc == 1 ]; then

		return 0

	else

		return 1

	fi

}

function save_raw()

{

	local raw_part=$(awk '$1 ~ /^raw$/ { print $2; }' $KDUMP_CONFIG_FILE)

	local kdump_dir

	if [ "$raw_part" ]; then

		[ -b "$raw_part" ] || {

			echo "raw partition $raw_part not found"

			return 1

		}

		kdump_dir=`grep ^path $KDUMP_CONFIG_FILE | cut -d' '  -f2-`

		if [ -z "${kdump_dir}" ]; then

			coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"

		else

			coredir="${kdump_dir}/`date +"%Y-%m-%d-%H:%M"`"

		fi

		mkdir -p "$coredir"

		[ -d "$coredir" ] || {

			echo "failed to create $coredir"

			return 1

		}

		if makedumpfile -R $coredir/vmcore <$raw_part >/dev/null 2>&1; then

			# dump found

			echo "Dump saved to $coredir/vmcore"

			# wipe makedumpfile header

			dd if=/dev/zero of=$raw_part bs=1b count=1 2>/dev/null

		else

			rm -rf "$coredir"

		fi

	fi

	return 0

}

get_save_path() {

	local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')

	if [ -z "$_save_path" ]; then

		_save_path="/var/crash"

	fi

	echo $_save_path

}

is_dump_target_configured() {

    local _target

    _target=$(egrep "^ext[234]|^xfs|^btrfs|^raw|^ssh|^nfs|^nfs4|^net" /etc/kdump.conf)

     [ -n "$_target" ]

}

local_fs_dump_target()

{

	local _target

	_target=$(egrep "^ext[234]|^xfs|^btrfs" /etc/kdump.conf)

	if [ $? -eq 0 ]; then

		echo $_target|awk '{print $2}'

	fi

}

path_to_be_relabeled() {

	local _path _target _mnt="/" _rmnt

	if is_dump_target_configured; then

		_target=$(local_fs_dump_target)

		if [[ -n "$_target" ]]; then

			_mnt=$(findmnt -k -f -n -r -o TARGET $_target)

			if [ -z "$_mnt" ]; then

				return

			fi

		else

			return

		fi

	fi

	_path=$(get_save_path)

	# if $_path is masked by other mount, we will not relabel it.

	# one exception is ! is_dump_target_configure && "$_rmnt" != "$_mnt"

	# for this exception see mkdumprd code about [ -z "$USING_METHOD" ]

	_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')

	if [[ "$_rmnt" == "$_mnt" ]] || ! is_dump_target_configured; then

		echo $_mnt/$_path

	fi

}

selinux_relabel()

{

	local _path _i _attr

	_path=$(path_to_be_relabeled)

	if [ -z "$_path" ] || ! [ -d "$_path" ] ; then

		return

	fi

	for _i in $(find $_path); do

		_attr=$(getfattr -m "security.selinux" $_i 2>/dev/null)

		if [ -z "$_attr" ]; then

			restorecon $_i;

		fi

	done

}

start_dump()

{

	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then

		start_fadump

	else

		load_kdump

	fi

	return $?

}

# Notes about xen support:

# pv guests are not supported

# hvm guests are supported only when you ensure below items:

# 1. Boot guests with either xen_emul_unplug=never or

#    xen_emul_unplug=unnecessary.

# 2. While recreating kdump initrd xen_netfront and xen_blkfront modules

#    are not loaded

function start()

{

	if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then

		selinux_relabel

	fi

	save_raw

	if [ $? -ne 0 ]; then

		echo -n "Starting kdump:"; failure; echo

		$LOGGER "failed to start up"

		return 1

	fi

	status

	rc=$?

	if [ $rc == 2 ]; then

		echo -n "Kdump is not supported on this kernel"; failure; echo

		return 1;

	else

		if [ $rc == 0 ]; then

			echo -n "Kdump already running"; success; echo

			return 0

		fi

	fi

	# Kernel parameter check is not required for fadump as 'fadump=on'

	# should have already been passed if dump mode is fadump

	if [ $DEFAULT_DUMP_MODE != "fadump" ]; then

		check_kernel_parameter

		if [ $? != 0 ]; then

			echo -n "Starting kdump:"; failure; echo

			$LOGGER "No crashkernel parameter specified for running kernel"

			return 1

		fi

	fi

	check_config

	if [ $? != 0 ]; then

		echo -n "Starting kdump:"; failure; echo

		$LOGGER "failed to start up, config file incorrect"

		return 1

	fi

	start_dump

	if [ $? != 0 ]; then

		echo -n "Starting kdump:"; failure; echo

		$LOGGER "failed to start up"

		return 1

	fi

	echo -n "Starting kdump:"; success; echo

	$LOGGER "started up"

}

stop_kdump()

{

	$KEXEC -p -u 2>/dev/null

	if [ $? != 0 ]; then

		$LOGGER "kexec: failed to unload kdump kernel"

		return 1

	fi

	$LOGGER "kexec: unloaded kdump kernel"

	return 0

}

function stop()

{

	if [ $DEFAULT_DUMP_MODE == "fadump" ]; then

		stop_fadump

	else

		stop_kdump

	fi

	if [ $? != 0 ]; then

		echo -n "Stopping kdump:"; failure; echo

		$LOGGER "failed to stop"

		return 1

	fi

	echo -n "Stopping kdump:"; success; echo

	$LOGGER "stopped"

	return 0

}

# Other kdump init instances will block in queue, until this one exits.

single_instance_lock

# Determine if the dump mode is kdump or fadump

determine_dump_mode

case "$1" in

  start)

	if [ $DEFAULT_DUMP_MODE == "fadump" ] && is_fadump_save_path

	then

		# fadump: second boot after crash, save vmcore

		save_fadump_core

		if [ $? -eq 0 ]; then

			reboot

		else

			save_fadump_core_on_error

			handle_fadump_default_action

		fi

	elif [ -s /proc/vmcore ]; then

		save_core

		reboot

	else

		start

	fi

	;;

  stop)

	stop

	;;

  status)

	EXIT_CODE=0

	status

	case "$?" in

	0)

		echo "Kdump is operational"

		EXIT_CODE=0

		;;

	1)

		echo "Kdump is not operational"

		EXIT_CODE=3

		;;

	2)

		echo "Kdump is unsupported on this kernel"

		EXIT_CODE=3

		;;

	esac

	exit $EXIT_CODE

	;;

  restart)

	stop

	start

	;;

  condrestart)

        EXIT_CODE=1

        status

        case "$?" in

        0)

                stop

                start

                EXIT_CODE=0

        ;;

        esac

        exit $EXIT_CODE

	;;

  propagate)

	propagate_ssh_key

	;;

  *)

	echo $"Usage: $0 {start|stop|status|restart|propagate}"

	exit 1

esac

exit $?