Subversion Repositories configs

Rev

Rev 164 | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
4 - 1
# Global Postfix configuration file. This file lists only a subset
2
# of all parameters. For the syntax, and for a complete parameter
3
# list, see the postconf(5) manual page (command: "man 5 postconf").
4
#
5
# For common configuration examples, see BASIC_CONFIGURATION_README
6
# and STANDARD_CONFIGURATION_README. To find these documents, use
7
# the command "postconf html_directory readme_directory", or go to
8
# http://www.postfix.org/.
9
#
10
# For best results, change no more than 2-3 parameters at a time,
11
# and test if Postfix still works after every change.
12
 
13
# SOFT BOUNCE
14
#
15
# The soft_bounce parameter provides a limited safety net for
16
# testing.  When soft_bounce is enabled, mail will remain queued that
17
# would otherwise bounce. This parameter disables locally-generated
18
# bounces, and prevents the SMTP server from rejecting mail permanently
19
# (by changing 5xx replies into 4xx replies). However, soft_bounce
20
# is no cure for address rewriting mistakes or mail routing mistakes.
21
#
22
#soft_bounce = no
23
 
24
# LOCAL PATHNAME INFORMATION
25
#
26
# The queue_directory specifies the location of the Postfix queue.
27
# This is also the root directory of Postfix daemons that run chrooted.
28
# See the files in examples/chroot-setup for setting up Postfix chroot
29
# environments on different UNIX systems.
30
#
31
queue_directory = /var/spool/postfix
32
 
33
# The command_directory parameter specifies the location of all
34
# postXXX commands.
35
#
36
command_directory = /usr/sbin
37
 
38
# The daemon_directory parameter specifies the location of all Postfix
39
# daemon programs (i.e. programs listed in the master.cf file). This
40
# directory must be owned by root.
41
#
42
daemon_directory = /usr/libexec/postfix
43
 
44
# The data_directory parameter specifies the location of Postfix-writable
45
# data files (caches, random numbers). This directory must be owned
46
# by the mail_owner account (see below).
47
#
48
data_directory = /var/lib/postfix
49
 
50
# QUEUE AND PROCESS OWNERSHIP
51
#
52
# The mail_owner parameter specifies the owner of the Postfix queue
53
# and of most Postfix daemon processes.  Specify the name of a user
54
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
55
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
56
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
57
# USER.
58
#
59
mail_owner = postfix
60
 
61
# The default_privs parameter specifies the default rights used by
62
# the local delivery agent for delivery to external file or command.
63
# These rights are used in the absence of a recipient user context.
64
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
65
#
66
#default_privs = nobody
67
 
68
# INTERNET HOST AND DOMAIN NAMES
69
#
70
# The myhostname parameter specifies the internet hostname of this
71
# mail system. The default is to use the fully-qualified domain name
72
# from gethostname(). $myhostname is used as a default value for many
73
# other configuration parameters.
74
#
75
#myhostname = host.domain.tld
76
#myhostname = virtual.domain.tld
77
myhostname = homeserver.ujsoftware.com
78
 
79
# The mydomain parameter specifies the local internet domain name.
80
# The default is to use $myhostname minus the first component.
81
# $mydomain is used as a default value for many other configuration
82
# parameters.
83
#
84
#mydomain = domain.tld
85
mydomain = ujsoftware.com
86
 
87
# SENDING MAIL
88
#
89
# The myorigin parameter specifies the domain that locally-posted
90
# mail appears to come from. The default is to append $myhostname,
91
# which is fine for small sites.  If you run a domain with multiple
92
# machines, you should (1) change this to $mydomain and (2) set up
93
# a domain-wide alias database that aliases each user to
94
# user@that.users.mailhost.
95
#
96
# For the sake of consistency between sender and recipient addresses,
97
# myorigin also specifies the default domain name that is appended
98
# to recipient addresses that have no @domain part.
99
#
100
#myorigin = $myhostname
101
myorigin = $mydomain
102
 
103
# RECEIVING MAIL
104
 
105
# The inet_interfaces parameter specifies the network interface
106
# addresses that this mail system receives mail on.  By default,
107
# the software claims all active interfaces on the machine. The
108
# parameter also controls delivery of mail to user@[ip.address].
109
#
110
# See also the proxy_interfaces parameter, for network addresses that
111
# are forwarded to us via a proxy or network address translator.
112
#
113
# Note: you need to stop/start Postfix when this parameter changes.
114
#
115
inet_interfaces = all
116
#inet_interfaces = $myhostname
117
#inet_interfaces = $myhostname, localhost
118
#inet_interfaces = localhost
119
 
120
# Enable IPv4, and IPv6 if supported
121
inet_protocols = all
122
 
123
# The proxy_interfaces parameter specifies the network interface
124
# addresses that this mail system receives mail on by way of a
125
# proxy or network address translation unit. This setting extends
126
# the address list specified with the inet_interfaces parameter.
127
#
128
# You must specify your proxy/NAT addresses when your system is a
129
# backup MX host for other domains, otherwise mail delivery loops
130
# will happen when the primary MX host is down.
131
#
132
#proxy_interfaces =
133
#proxy_interfaces = 1.2.3.4
134
 
135
# The mydestination parameter specifies the list of domains that this
136
# machine considers itself the final destination for.
137
#
138
# These domains are routed to the delivery agent specified with the
139
# local_transport parameter setting. By default, that is the UNIX
140
# compatible delivery agent that lookups all recipients in /etc/passwd
141
# and /etc/aliases or their equivalent.
142
#
143
# The default is $myhostname + localhost.$mydomain.  On a mail domain
144
# gateway, you should also include $mydomain.
145
#
146
# Do not specify the names of virtual domains - those domains are
147
# specified elsewhere (see VIRTUAL_README).
148
#
149
# Do not specify the names of domains that this machine is backup MX
150
# host for. Specify those names via the relay_domains settings for
151
# the SMTP server, or use permit_mx_backup if you are lazy (see
152
# STANDARD_CONFIGURATION_README).
153
#
154
# The local machine is always the final destination for mail addressed
155
# to user@[the.net.work.address] of an interface that the mail system
156
# receives mail on (see the inet_interfaces parameter).
157
#
158
# Specify a list of host or domain names, /file/name or type:table
159
# patterns, separated by commas and/or whitespace. A /file/name
160
# pattern is replaced by its contents; a type:table is matched when
161
# a name matches a lookup key (the right-hand side is ignored).
162
# Continue long lines by starting the next line with whitespace.
163
#
164
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
165
#
166
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
167
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
168
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
169
#	mail.$mydomain, www.$mydomain, ftp.$mydomain
170
 
171
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
172
#
173
# The local_recipient_maps parameter specifies optional lookup tables
174
# with all names or addresses of users that are local with respect
175
# to $mydestination, $inet_interfaces or $proxy_interfaces.
176
#
177
# If this parameter is defined, then the SMTP server will reject
178
# mail for unknown local users. This parameter is defined by default.
179
#
180
# To turn off local recipient checking in the SMTP server, specify
181
# local_recipient_maps = (i.e. empty).
182
#
183
# The default setting assumes that you use the default Postfix local
184
# delivery agent for local delivery. You need to update the
185
# local_recipient_maps setting if:
186
#
187
# - You define $mydestination domain recipients in files other than
188
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
189
#   For example, you define $mydestination domain recipients in
190
#   the $virtual_mailbox_maps files.
191
#
192
# - You redefine the local delivery agent in master.cf.
193
#
194
# - You redefine the "local_transport" setting in main.cf.
195
#
196
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
197
#   feature of the Postfix local delivery agent (see local(8)).
198
#
199
# Details are described in the LOCAL_RECIPIENT_README file.
200
#
201
# Beware: if the Postfix SMTP server runs chrooted, you probably have
202
# to access the passwd file via the proxymap service, in order to
203
# overcome chroot restrictions. The alternative, having a copy of
204
# the system passwd file in the chroot jail is just not practical.
205
#
206
# The right-hand side of the lookup tables is conveniently ignored.
207
# In the left-hand side, specify a bare username, an @domain.tld
208
# wild-card, or specify a user@domain.tld address.
209
#
210
#local_recipient_maps = unix:passwd.byname $alias_maps
211
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
212
local_recipient_maps =
213
 
214
# The unknown_local_recipient_reject_code specifies the SMTP server
215
# response code when a recipient domain matches $mydestination or
216
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
217
# and the recipient address or address local-part is not found.
218
#
219
# The default setting is 550 (reject mail) but it is safer to start
220
# with 450 (try again later) until you are certain that your
221
# local_recipient_maps settings are OK.
222
#
223
unknown_local_recipient_reject_code = 550
224
 
225
# TRUST AND RELAY CONTROL
226
 
227
# The mynetworks parameter specifies the list of "trusted" SMTP
228
# clients that have more privileges than "strangers".
229
#
230
# In particular, "trusted" SMTP clients are allowed to relay mail
231
# through Postfix.  See the smtpd_recipient_restrictions parameter
232
# in postconf(5).
233
#
234
# You can specify the list of "trusted" network addresses by hand
235
# or you can let Postfix do it for you (which is the default).
236
#
237
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
238
# clients in the same IP subnetworks as the local machine.
239
# On Linux, this does works correctly only with interfaces specified
240
# with the "ifconfig" command.
241
#
242
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
243
# clients in the same IP class A/B/C networks as the local machine.
244
# Don't do this with a dialup site - it would cause Postfix to "trust"
245
# your entire provider's network.  Instead, specify an explicit
246
# mynetworks list by hand, as described below.
247
#
248
# Specify "mynetworks_style = host" when Postfix should "trust"
249
# only the local machine.
250
#
251
#mynetworks_style = class
252
#mynetworks_style = subnet
93 - 253
mynetworks_style = host
4 - 254
 
255
# Alternatively, you can specify the mynetworks list by hand, in
256
# which case Postfix ignores the mynetworks_style setting.
257
#
258
# Specify an explicit list of network/netmask patterns, where the
259
# mask specifies the number of bits in the network part of a host
260
# address.
261
#
262
# You can also specify the absolute pathname of a pattern file instead
263
# of listing the patterns here. Specify type:table for table-based lookups
264
# (the value on the table right-hand side is not used).
265
#
164 - 266
#mynetworks = 10.192.25.0/24 127.0.0.0/8
4 - 267
#mynetworks = $config_directory/mynetworks
268
#mynetworks = hash:/etc/postfix/network_table
269
 
270
# The relay_domains parameter restricts what destinations this system will
271
# relay mail to.  See the smtpd_recipient_restrictions description in
272
# postconf(5) for detailed information.
273
#
274
# By default, Postfix relays mail
275
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
276
# - from "untrusted" clients to destinations that match $relay_domains or
277
#   subdomains thereof, except addresses with sender-specified routing.
278
# The default relay_domains value is $mydestination.
279
#
280
# In addition to the above, the Postfix SMTP server by default accepts mail
281
# that Postfix is final destination for:
282
# - destinations that match $inet_interfaces or $proxy_interfaces,
283
# - destinations that match $mydestination
284
# - destinations that match $virtual_alias_domains,
285
# - destinations that match $virtual_mailbox_domains.
286
# These destinations do not need to be listed in $relay_domains.
287
#
288
# Specify a list of hosts or domains, /file/name patterns or type:name
289
# lookup tables, separated by commas and/or whitespace.  Continue
290
# long lines by starting the next line with whitespace. A file name
291
# is replaced by its contents; a type:name table is matched when a
292
# (parent) domain appears as lookup key.
293
#
294
# NOTE: Postfix will not automatically forward mail for domains that
295
# list this system as their primary or backup MX host. See the
296
# permit_mx_backup restriction description in postconf(5).
297
#
298
#relay_domains = $mydestination
299
relay_domains =
300
 
301
# INTERNET OR INTRANET
302
 
303
# The relayhost parameter specifies the default host to send mail to
304
# when no entry is matched in the optional transport(5) table. When
305
# no relayhost is given, mail is routed directly to the destination.
306
#
307
# On an intranet, specify the organizational domain name. If your
308
# internal DNS uses no MX records, specify the name of the intranet
309
# gateway host instead.
310
#
311
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
312
# [address] or [address]:port; the form [host] turns off MX lookups.
313
#
314
# If you're connected via UUCP, see also the default_transport parameter.
315
#
316
#relayhost = $mydomain
317
#relayhost = [gateway.my.domain]
318
#relayhost = [mailserver.isp.tld]
319
#relayhost = uucphost
320
#relayhost = [an.ip.add.ress]
90 - 321
#relayhost = smtp.cox.net
189 - 322
#relayhost = [mail.dnsexit.com]:2525
323
#relayhost = [mail.uwejacobs.com]:290
324
#relayhost = [mail.ujsoftware.com]:290
325
relayhost = [smtp.gmail.com]:587
326
smtp_use_tls = yes
90 - 327
smtp_sasl_auth_enable = yes
328
smtp_sasl_password_maps = hash:/etc/postfix/relay_passwords
189 - 329
smtp_sasl_security_options = noanonymous
330
smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt
4 - 331
 
332
# REJECTING UNKNOWN RELAY USERS
333
#
334
# The relay_recipient_maps parameter specifies optional lookup tables
335
# with all addresses in the domains that match $relay_domains.
336
#
337
# If this parameter is defined, then the SMTP server will reject
338
# mail for unknown relay users. This feature is off by default.
339
#
340
# The right-hand side of the lookup tables is conveniently ignored.
341
# In the left-hand side, specify an @domain.tld wild-card, or specify
342
# a user@domain.tld address.
343
#
344
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
345
 
346
# INPUT RATE CONTROL
347
#
348
# The in_flow_delay configuration parameter implements mail input
349
# flow control. This feature is turned on by default, although it
350
# still needs further development (it's disabled on SCO UNIX due
351
# to an SCO bug).
352
#
353
# A Postfix process will pause for $in_flow_delay seconds before
354
# accepting a new message, when the message arrival rate exceeds the
355
# message delivery rate. With the default 100 SMTP server process
356
# limit, this limits the mail inflow to 100 messages a second more
357
# than the number of messages delivered per second.
358
#
359
# Specify 0 to disable the feature. Valid delays are 0..10.
360
#
361
#in_flow_delay = 1s
362
 
363
# ADDRESS REWRITING
364
#
365
# The ADDRESS_REWRITING_README document gives information about
366
# address masquerading or other forms of address rewriting including
367
# username->Firstname.Lastname mapping.
368
 
369
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
370
#
371
# The VIRTUAL_README document gives information about the many forms
372
# of domain hosting that Postfix supports.
373
 
374
# "USER HAS MOVED" BOUNCE MESSAGES
375
#
376
# See the discussion in the ADDRESS_REWRITING_README document.
377
 
378
# TRANSPORT MAP
379
#
380
# See the discussion in the ADDRESS_REWRITING_README document.
381
 
382
# ALIAS DATABASE
383
#
384
# The alias_maps parameter specifies the list of alias databases used
385
# by the local delivery agent. The default list is system dependent.
386
#
387
# On systems with NIS, the default is to search the local alias
388
# database, then the NIS alias database. See aliases(5) for syntax
389
# details.
390
#
391
# If you change the alias database, run "postalias /etc/aliases" (or
392
# wherever your system stores the mail alias file), or simply run
393
# "newaliases" to build the necessary DBM or DB file.
394
#
395
# It will take a minute or so before changes become visible.  Use
396
# "postfix reload" to eliminate the delay.
397
#
398
#alias_maps = dbm:/etc/aliases
399
alias_maps = hash:/etc/aliases
400
#alias_maps = hash:/etc/aliases, nis:mail.aliases
401
#alias_maps = netinfo:/aliases
402
 
403
# The alias_database parameter specifies the alias database(s) that
404
# are built with "newaliases" or "sendmail -bi".  This is a separate
405
# configuration parameter, because alias_maps (see above) may specify
406
# tables that are not necessarily all under control by Postfix.
407
#
408
#alias_database = dbm:/etc/aliases
409
#alias_database = dbm:/etc/mail/aliases
410
alias_database = hash:/etc/aliases
411
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
412
 
413
# ADDRESS EXTENSIONS (e.g., user+foo)
414
#
415
# The recipient_delimiter parameter specifies the separator between
416
# user names and address extensions (user+foo). See canonical(5),
417
# local(8), relocated(5) and virtual(5) for the effects this has on
418
# aliases, canonical, virtual, relocated and .forward file lookups.
419
# Basically, the software tries user+foo and .forward+foo before
420
# trying user and .forward.
421
#
422
#recipient_delimiter = +
423
 
424
# DELIVERY TO MAILBOX
425
#
426
# The home_mailbox parameter specifies the optional pathname of a
427
# mailbox file relative to a user's home directory. The default
428
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
429
# "Maildir/" for qmail-style delivery (the / is required).
430
#
431
#home_mailbox = Mailbox
432
#home_mailbox = Maildir/
433
 
434
# The mail_spool_directory parameter specifies the directory where
435
# UNIX-style mailboxes are kept. The default setting depends on the
436
# system type.
437
#
438
#mail_spool_directory = /var/mail
439
#mail_spool_directory = /var/spool/mail
440
 
441
# The mailbox_command parameter specifies the optional external
442
# command to use instead of mailbox delivery. The command is run as
443
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
444
# Exception:  delivery for root is done as $default_user.
445
#
446
# Other environment variables of interest: USER (recipient username),
447
# EXTENSION (address extension), DOMAIN (domain part of address),
448
# and LOCAL (the address localpart).
449
#
450
# Unlike other Postfix configuration parameters, the mailbox_command
451
# parameter is not subjected to $parameter substitutions. This is to
452
# make it easier to specify shell syntax (see example below).
453
#
454
# Avoid shell meta characters because they will force Postfix to run
455
# an expensive shell process. Procmail alone is expensive enough.
456
#
457
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
458
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
459
#
460
#mailbox_command = /some/where/procmail
461
#mailbox_command = /some/where/procmail -a "$EXTENSION"
462
mailbox_command = /usr/bin/zarafa-dagent "$USER"
463
 
464
# The mailbox_transport specifies the optional transport in master.cf
465
# to use after processing aliases and .forward files. This parameter
466
# has precedence over the mailbox_command, fallback_transport and
467
# luser_relay parameters.
468
#
469
# Specify a string of the form transport:nexthop, where transport is
470
# the name of a mail delivery transport defined in master.cf.  The
471
# :nexthop part is optional. For more details see the sample transport
472
# configuration file.
473
#
474
# NOTE: if you use this feature for accounts not in the UNIX password
475
# file, then you must update the "local_recipient_maps" setting in
476
# the main.cf file, otherwise the SMTP server will reject mail for
477
# non-UNIX accounts with "User unknown in local recipient table".
478
#
479
#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
480
mailbox_transport = zarafa:
481
 
482
# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
483
# server using LMTP (Local Mail Transport Protocol), this is prefered
484
# over the older cyrus deliver program by setting the
485
# mailbox_transport as below:
486
#
487
# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
488
#
489
# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
490
# these settings.
491
#
492
# local_destination_recipient_limit = 300
493
# local_destination_concurrency_limit = 5
494
#
495
# Of course you should adjust these settings as appropriate for the
496
# capacity of the hardware you are using. The recipient limit setting
497
# can be used to take advantage of the single instance message store
498
# capability of Cyrus. The concurrency limit can be used to control
499
# how many simultaneous LMTP sessions will be permitted to the Cyrus
500
# message store.
501
#
502
# To use the old cyrus deliver program you have to set:
503
#mailbox_transport = cyrus
504
 
505
# The fallback_transport specifies the optional transport in master.cf
506
# to use for recipients that are not found in the UNIX passwd database.
507
# This parameter has precedence over the luser_relay parameter.
508
#
509
# Specify a string of the form transport:nexthop, where transport is
510
# the name of a mail delivery transport defined in master.cf.  The
511
# :nexthop part is optional. For more details see the sample transport
512
# configuration file.
513
#
514
# NOTE: if you use this feature for accounts not in the UNIX password
515
# file, then you must update the "local_recipient_maps" setting in
516
# the main.cf file, otherwise the SMTP server will reject mail for
517
# non-UNIX accounts with "User unknown in local recipient table".
518
#
519
#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
520
#fallback_transport =
521
 
522
# The luser_relay parameter specifies an optional destination address
523
# for unknown recipients.  By default, mail for unknown@$mydestination,
524
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
525
# as undeliverable.
526
#
527
# The following expansions are done on luser_relay: $user (recipient
528
# username), $shell (recipient shell), $home (recipient home directory),
529
# $recipient (full recipient address), $extension (recipient address
530
# extension), $domain (recipient domain), $local (entire recipient
531
# localpart), $recipient_delimiter. Specify ${name?value} or
532
# ${name:value} to expand value only when $name does (does not) exist.
533
#
534
# luser_relay works only for the default Postfix local delivery agent.
535
#
536
# NOTE: if you use this feature for accounts not in the UNIX password
537
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
538
# the main.cf file, otherwise the SMTP server will reject mail for
539
# non-UNIX accounts with "User unknown in local recipient table".
540
#
541
#luser_relay = $user@other.host
542
#luser_relay = $local@other.host
543
#luser_relay = admin+$local
544
 
545
# JUNK MAIL CONTROLS
546
#
547
# The controls listed here are only a very small subset. The file
548
# SMTPD_ACCESS_README provides an overview.
549
 
550
# The header_checks parameter specifies an optional table with patterns
551
# that each logical message header is matched against, including
552
# headers that span multiple physical lines.
553
#
554
# By default, these patterns also apply to MIME headers and to the
555
# headers of attached messages. With older Postfix versions, MIME and
556
# attached message headers were treated as body text.
557
#
558
# For details, see "man header_checks".
559
#
560
#header_checks = regexp:/etc/postfix/header_checks
561
 
562
# FAST ETRN SERVICE
563
#
564
# Postfix maintains per-destination logfiles with information about
565
# deferred mail, so that mail can be flushed quickly with the SMTP
566
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
567
# See the ETRN_README document for a detailed description.
568
#
569
# The fast_flush_domains parameter controls what destinations are
570
# eligible for this service. By default, they are all domains that
571
# this server is willing to relay mail to.
572
#
573
#fast_flush_domains = $relay_domains
574
 
575
# SHOW SOFTWARE VERSION OR NOT
576
#
577
# The smtpd_banner parameter specifies the text that follows the 220
578
# code in the SMTP server's greeting banner. Some people like to see
579
# the mail version advertised. By default, Postfix shows no version.
580
#
581
# You MUST specify $myhostname at the start of the text. That is an
582
# RFC requirement. Postfix itself does not care.
583
#
584
#smtpd_banner = $myhostname ESMTP $mail_name
585
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
586
 
587
# PARALLEL DELIVERY TO THE SAME DESTINATION
588
#
589
# How many parallel deliveries to the same user or domain? With local
590
# delivery, it does not make sense to do massively parallel delivery
591
# to the same user, because mailbox updates must happen sequentially,
592
# and expensive pipelines in .forward files can cause disasters when
593
# too many are run at the same time. With SMTP deliveries, 10
594
# simultaneous connections to the same domain could be sufficient to
595
# raise eyebrows.
596
#
597
# Each message delivery transport has its XXX_destination_concurrency_limit
598
# parameter.  The default is $default_destination_concurrency_limit for
599
# most delivery transports. For the local delivery agent the default is 2.
600
 
601
#local_destination_concurrency_limit = 2
602
#default_destination_concurrency_limit = 20
603
 
604
# DEBUGGING CONTROL
605
#
606
# The debug_peer_level parameter specifies the increment in verbose
607
# logging level when an SMTP client or server host name or address
608
# matches a pattern in the debug_peer_list parameter.
609
#
610
debug_peer_level = 2
611
 
612
# The debug_peer_list parameter specifies an optional list of domain
613
# or network patterns, /file/name patterns or type:name tables. When
614
# an SMTP client or server host name or address matches a pattern,
615
# increase the verbose logging level by the amount specified in the
616
# debug_peer_level parameter.
617
#
618
#debug_peer_list = 127.0.0.1
619
#debug_peer_list = some.domain
620
 
621
# The debugger_command specifies the external command that is executed
622
# when a Postfix daemon program is run with the -D option.
623
#
624
# Use "command .. & sleep 5" so that the debugger can attach before
625
# the process marches on. If you use an X-based debugger, be sure to
626
# set up your XAUTHORITY environment variable before starting Postfix.
627
#
628
debugger_command =
629
	 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
630
	 ddd $daemon_directory/$process_name $process_id & sleep 5
631
 
632
# If you can't use X, use this to capture the call stack when a
633
# daemon crashes. The result is in a file in the configuration
634
# directory, and is named after the process name and the process ID.
635
#
636
# debugger_command =
637
#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
638
#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
639
#	>$config_directory/$process_name.$process_id.log & sleep 5
640
#
641
# Another possibility is to run gdb under a detached screen session.
642
# To attach to the screen sesssion, su root and run "screen -r
643
# <id_string>" where <id_string> uniquely matches one of the detached
644
# sessions (from "screen -list").
645
#
646
# debugger_command =
647
#	PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
648
#	-dmS $process_name gdb $daemon_directory/$process_name
649
#	$process_id & sleep 1
650
 
651
# INSTALL-TIME CONFIGURATION INFORMATION
652
#
653
# The following parameters are used when installing a new Postfix version.
654
#
655
# sendmail_path: The full pathname of the Postfix sendmail command.
656
# This is the Sendmail-compatible mail posting interface.
657
#
658
sendmail_path = /usr/sbin/sendmail.postfix
659
 
660
# newaliases_path: The full pathname of the Postfix newaliases command.
661
# This is the Sendmail-compatible command to build alias databases.
662
#
663
newaliases_path = /usr/bin/newaliases.postfix
664
 
665
# mailq_path: The full pathname of the Postfix mailq command.  This
666
# is the Sendmail-compatible mail queue listing command.
667
#
668
mailq_path = /usr/bin/mailq.postfix
669
 
670
# setgid_group: The group for mail submission and queue management
671
# commands.  This must be a group name with a numerical group ID that
672
# is not shared with other accounts, not even with the Postfix account.
673
#
674
setgid_group = postdrop
675
 
676
# html_directory: The location of the Postfix HTML documentation.
677
#
678
html_directory = no
679
 
680
# manpage_directory: The location of the Postfix on-line manual pages.
681
#
682
manpage_directory = /usr/share/man
683
 
684
# sample_directory: The location of the Postfix sample configuration files.
685
# This parameter is obsolete as of Postfix 2.1.
686
#
687
sample_directory = /usr/share/doc/postfix-2.6.6/samples
688
 
689
# readme_directory: The location of the Postfix README files.
690
#
691
readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES
692
 
693
#
694
# Amavis
695
#
696
content_filter = smtp-amavis:[127.0.0.1]:10024
697
 
698
#
699
# Zarafa
700
#
701
zarafa_destination_recipient_limit = 1
702
 
703
#
704
# Virtual Mailboxes
705
#
706
#virtual_mailbox_domains = ujsoftware.com, uwejacobs.com, andreahjacobs.com homeserver.ujsoftware.com
707
#virtual_mailbox_maps = ldap:/etc/postfix/ldap-users.cf
708
#virtual_alias_maps = ldap:/etc/postfix/ldap-aliases.cf
709
#virtual_transport = lmtp:127.0.0.1:2003
710
 
711
#
712
# Message Size Limit
713
#
116 - 714
#message_size_limit = 20480000
117 - 715
mailbox_size_limit = 0
716
message_size_limit = 0