Subversion Repositories configs

# -*- text -*-

##

## radiusd.conf	-- FreeRADIUS server configuration file.

##

##	http://www.freeradius.org/

##	$Id$

##

######################################################################

#

#	Read "man radiusd" before editing this file.  See the section

#	titled DEBUGGING.  It outlines a method where you can quickly

#	obtain the configuration you want, without running into

#	trouble.

#

#	Run the server in debugging mode, and READ the output.

#

#		$ radiusd -X

#

#	We cannot emphasize this point strongly enough.  The vast

#	majority of problems can be solved by carefully reading the

#	debugging output, which includes warnings about common issues,

#	and suggestions for how they may be fixed.

#

#	There may be a lot of output, but look carefully for words like:

#	"warning", "error", "reject", or "failure".  The messages there

#	will usually be enough to guide you to a solution.

#

#	If you are going to ask a question on the mailing list, then

#	explain what you are trying to do, and include the output from

#	debugging mode (radiusd -X).  Failure to do so means that all

#	of the responses to your question will be people telling you

#	to "post the output of radiusd -X".

######################################################################

#

#  	The location of other config files and logfiles are declared

#  	in this file.

#

#  	Also general configuration for modules can be done in this

#  	file, it is exported through the API to modules that ask for

#  	it.

#

#	See "man radiusd.conf" for documentation on the format of this

#	file.  Note that the individual configuration items are NOT

#	documented in that "man" page.  They are only documented here,

#	in the comments.

#

#	As of 2.0.0, FreeRADIUS supports a simple processing language

#	in the "authorize", "authenticate", "accounting", etc. sections.

#	See "man unlang" for details.

#

prefix = /usr

exec_prefix = /usr

sysconfdir = /etc

localstatedir = /var

sbindir = /usr/sbin

logdir = ${localstatedir}/log/radius

raddbdir = ${sysconfdir}/raddb

radacctdir = ${logdir}/radacct

#

#  name of the running server.  See also the "-n" command-line option.

name = radiusd

#  Location of config and logfiles.

confdir = ${raddbdir}

run_dir = ${localstatedir}/run/${name}

# Should likely be ${localstatedir}/lib/radiusd

db_dir = ${raddbdir}

#

# libdir: Where to find the rlm_* modules.

#

#   This should be automatically set at configuration time.

#

#   If the server builds and installs, but fails at execution time

#   with an 'undefined symbol' error, then you can use the libdir

#   directive to work around the problem.

#

#   The cause is usually that a library has been installed on your

#   system in a place where the dynamic linker CANNOT find it.  When

#   executing as root (or another user), your personal environment MAY

#   be set up to allow the dynamic linker to find the library.  When

#   executing as a daemon, FreeRADIUS MAY NOT have the same

#   personalized configuration.

#

#   To work around the problem, find out which library contains that symbol,

#   and add the directory containing that library to the end of 'libdir',

#   with a colon separating the directory names.  NO spaces are allowed.

#

#   e.g. libdir = /usr/local/lib:/opt/package/lib

#

#   You can also try setting the LD_LIBRARY_PATH environment variable

#   in a script which starts the server.

#

#   If that does not work, then you can re-configure and re-build the

#   server to NOT use shared libraries, via:

#

#	./configure --disable-shared

#	make

#	make install

#

libdir = /usr/lib64/freeradius

#  pidfile: Where to place the PID of the RADIUS server.

#

#  The server may be signalled while it's running by using this

#  file.

#

#  This file is written when ONLY running in daemon mode.

#

#  e.g.:  kill -HUP `cat /var/run/radiusd/radiusd.pid`

#

pidfile = ${run_dir}/${name}.pid

#  chroot: directory where the server does "chroot".

#

#  The chroot is done very early in the process of starting the server.

#  After the chroot has been performed it switches to the "user" listed

#  below (which MUST be specified).  If "group" is specified, it switchs

#  to that group, too.  Any other groups listed for the specified "user"

#  in "/etc/group" are also added as part of this process.

#

#  The current working directory (chdir / cd) is left *outside* of the

#  chroot until all of the modules have been initialized.  This allows

#  the "raddb" directory to be left outside of the chroot.  Once the

#  modules have been initialized, it does a "chdir" to ${logdir}.  This

#  means that it should be impossible to break out of the chroot.

#

#  If you are worried about security issues related to this use of chdir,

#  then simply ensure that the "raddb" directory is inside of the chroot,

#  end be sure to do "cd raddb" BEFORE starting the server.

#

#  If the server is statically linked, then the only files that have

#  to exist in the chroot are ${run_dir} and ${logdir}.  If you do the

#  "cd raddb" as discussed above, then the "raddb" directory has to be

#  inside of the chroot directory, too.

#

#chroot = /path/to/chroot/directory

# user/group: The name (or #number) of the user/group to run radiusd as.

#

#   If these are commented out, the server will run as the user/group

#   that started it.  In order to change to a different user/group, you

#   MUST be root ( or have root privleges ) to start the server.

#

#   We STRONGLY recommend that you run the server with as few permissions

#   as possible.  That is, if you're not using shadow passwords, the

#   user and group items below should be set to radius'.

#

#  NOTE that some kernels refuse to setgid(group) when the value of

#  (unsigned)group is above 60000; don't use group nobody on these systems!

#

#  On systems with shadow passwords, you might have to set 'group = shadow'

#  for the server to be able to read the shadow password file.  If you can

#  authenticate users while in debug mode, but not in daemon mode, it may be

#  that the debugging mode server is running as a user that can read the

#  shadow info, and the user listed below can not.

#

#  The server will also try to use "initgroups" to read /etc/groups.

#  It will join all groups where "user" is a member.  This can allow

#  for some finer-grained access controls.

#

user = radiusd

group = radiusd

#  max_request_time: The maximum time (in seconds) to handle a request.

#

#  Requests which take more time than this to process may be killed, and

#  a REJECT message is returned.

#

#  WARNING: If you notice that requests take a long time to be handled,

#  then this MAY INDICATE a bug in the server, in one of the modules

#  used to handle a request, OR in your local configuration.

#

#  This problem is most often seen when using an SQL database.  If it takes

#  more than a second or two to receive an answer from the SQL database,

#  then it probably means that you haven't indexed the database.  See your

#  SQL server documentation for more information.

#

#  Useful range of values: 5 to 120

#

max_request_time = 30

#  cleanup_delay: The time to wait (in seconds) before cleaning up

#  a reply which was sent to the NAS.

#

#  The RADIUS request is normally cached internally for a short period

#  of time, after the reply is sent to the NAS.  The reply packet may be

#  lost in the network, and the NAS will not see it.  The NAS will then

#  re-send the request, and the server will respond quickly with the

#  cached reply.

#

#  If this value is set too low, then duplicate requests from the NAS

#  MAY NOT be detected, and will instead be handled as seperate requests.

#

#  If this value is set too high, then the server will cache too many

#  requests, and some new requests may get blocked.  (See 'max_requests'.)

#

#  Useful range of values: 2 to 10

#

cleanup_delay = 5

#  max_requests: The maximum number of requests which the server keeps

#  track of.  This should be 256 multiplied by the number of clients.

#  e.g. With 4 clients, this number should be 1024.

#

#  If this number is too low, then when the server becomes busy,

#  it will not respond to any new requests, until the 'cleanup_delay'

#  time has passed, and it has removed the old requests.

#

#  If this number is set too high, then the server will use a bit more

#  memory for no real benefit.

#

#  If you aren't sure what it should be set to, it's better to set it

#  too high than too low.  Setting it to 1000 per client is probably

#  the highest it should be.

#

#  Useful range of values: 256 to infinity

#

max_requests = 1024

#  listen: Make the server listen on a particular IP address, and send

#  replies out from that address. This directive is most useful for

#  hosts with multiple IP addresses on one interface.

#

#  If you want the server to listen on additional addresses, or on

#  additionnal ports, you can use multiple "listen" sections.

#

#  Each section make the server listen for only one type of packet,

#  therefore authentication and accounting have to be configured in

#  different sections.

#

#  The server ignore all "listen" section if you are using '-i' and '-p'

#  on the command line.

#

listen {

	#  Type of packets to listen for.

	#  Allowed values are:

	#	auth	listen for authentication packets

	#	acct	listen for accounting packets

	#	proxy   IP to use for sending proxied packets

	#	detail  Read from the detail file.  For examples, see

	#               raddb/sites-available/copy-acct-to-home-server

	#	status  listen for Status-Server packets.  For examples,

	#		see raddb/sites-available/status

	#	coa     listen for CoA-Request and Disconnect-Request

	#		packets.  For examples, see the file

	#		raddb/sites-available/coa-server

	#

	type = auth

	#  Note: "type = proxy" lets you control the source IP used for

	#        proxying packets, with some limitations:

	#

	#    * A proxy listener CANNOT be used in a virtual server section.

	#    * You should probably set "port = 0".

	#    * Any "clients" configuration will be ignored.

	#

	#  See also proxy.conf, and the "src_ipaddr" configuration entry

	#  in the sample "home_server" section.  When you specify the

	#  source IP address for packets sent to a home server, the

	#  proxy listeners are automatically created.

	#  IP address on which to listen.

	#  Allowed values are:

	#	dotted quad (1.2.3.4)

	#       hostname    (radius.example.com)

	#       wildcard    (*)

	ipaddr = *

	#  OR, you can use an IPv6 address, but not both

	#  at the same time.

#	ipv6addr = ::	# any.  ::1 == localhost

	#  Port on which to listen.

	#  Allowed values are:

	#	integer port number (1812)

	#	0 means "use /etc/services for the proper port"

	port = 0

	#  Some systems support binding to an interface, in addition

	#  to the IP address.  This feature isn't strictly necessary,

	#  but for sites with many IP addresses on one interface,

	#  it's useful to say "listen on all addresses for eth0".

	#

	#  If your system does not support this feature, you will

	#  get an error if you try to use it.

	#

#	interface = eth0

	#  Per-socket lists of clients.  This is a very useful feature.

	#

	#  The name here is a reference to a section elsewhere in

	#  radiusd.conf, or clients.conf.  Having the name as

	#  a reference allows multiple sockets to use the same

	#  set of clients.

	#

	#  If this configuration is used, then the global list of clients

	#  is IGNORED for this "listen" section.  Take care configuring

	#  this feature, to ensure you don't accidentally disable a

	#  client you need.

	#

	#  See clients.conf for the configuration of "per_socket_clients".

	#

#	clients = per_socket_clients

}

#  This second "listen" section is for listening on the accounting

#  port, too.

#

listen {

	ipaddr = *

#	ipv6addr = ::

	port = 0

	type = acct

#	interface = eth0

#	clients = per_socket_clients

}

#  hostname_lookups: Log the names of clients or just their IP addresses

#  e.g., www.freeradius.org (on) or 206.47.27.232 (off).

#

#  The default is 'off' because it would be overall better for the net

#  if people had to knowingly turn this feature on, since enabling it

#  means that each client request will result in AT LEAST one lookup

#  request to the nameserver.   Enabling hostname_lookups will also

#  mean that your server may stop randomly for 30 seconds from time

#  to time, if the DNS requests take too long.

#

#  Turning hostname lookups off also means that the server won't block

#  for 30 seconds, if it sees an IP address which has no name associated

#  with it.

#

#  allowed values: {no, yes}

#

hostname_lookups = no

#  Core dumps are a bad thing.  This should only be set to 'yes'

#  if you're debugging a problem with the server.

#

#  allowed values: {no, yes}

#

allow_core_dumps = no

#  Regular expressions

#

#  These items are set at configure time.  If they're set to "yes",

#  then setting them to "no" turns off regular expression support.

#

#  If they're set to "no" at configure time, then setting them to "yes"

#  WILL NOT WORK.  It will give you an error.

#

regular_expressions	= yes

extended_expressions	= yes

#

#  Logging section.  The various "log_*" configuration items

#  will eventually be moved here.

#

log {

	#

	#  Destination for log messages.  This can be one of:

	#

	#	files - log to "file", as defined below.

	#	syslog - to syslog (see also the "syslog_facility", below.

	#	stdout - standard output

	#	stderr - standard error.

	#

	#  The command-line option "-X" over-rides this option, and forces

	#  logging to go to stdout.

	#

	destination = files

	#

	#  The logging messages for the server are appended to the

	#  tail of this file if destination == "files"

	#

	#  If the server is running in debugging mode, this file is

	#  NOT used.

	#

	file = ${logdir}/radius.log

	#

	#  If this configuration parameter is set, then log messages for

	#  a *request* go to this file, rather than to radius.log.

	#

	#  i.e. This is a log file per request, once the server has accepted

	#  the request as being from a valid client.  Messages that are

	#  not associated with a request still go to radius.log.

	#

	#  Not all log messages in the server core have been updated to use

	#  this new internal API.  As a result, some messages will still

	#  go to radius.log.  Please submit patches to fix this behavior.

	#

	#  The file name is expanded dynamically.  You should ONLY user

	#  server-side attributes for the filename (e.g. things you control).

	#  Using this feature MAY also slow down the server substantially,

	#  especially if you do thinks like SQL calls as part of the

	#  expansion of the filename.

	#

	#  The name of the log file should use attributes that don't change

	#  over the lifetime of a request, such as User-Name,

	#  Virtual-Server or Packet-Src-IP-Address.  Otherwise, the log

	#  messages will be distributed over multiple files.

	#

	#  Logging can be enabled for an individual request by a special

	#  dynamic expansion macro:  %{debug: 1}, where the debug level

	#  for this request is set to '1' (or 2, 3, etc.).  e.g.

	#

	#	...

	#	update control {

	#	       Tmp-String-0 = "%{debug:1}"

	#	}

	#	...

	#

	#  The attribute that the value is assigned to is unimportant,

	#  and should be a "throw-away" attribute with no side effects.

	#

	#requests = ${logdir}/radiusd-%{%{Virtual-Server}:-DEFAULT}-%Y%m%d.log

	#

	#  Which syslog facility to use, if ${destination} == "syslog"

	#

	#  The exact values permitted here are OS-dependent.  You probably

	#  don't want to change this.

	#

	syslog_facility = daemon

	#  Log the full User-Name attribute, as it was found in the request.

	#

	# allowed values: {no, yes}

	#

	stripped_names = no

	#  Log authentication requests to the log file.

	#

	#  allowed values: {no, yes}

	#

	auth = no

	#  Log passwords with the authentication requests.

	#  auth_badpass  - logs password if it's rejected

	#  auth_goodpass - logs password if it's correct

	#

	#  allowed values: {no, yes}

	#

	auth_badpass = no

	auth_goodpass = no

	#  Log additional text at the end of the "Login OK" messages.

	#  for these to work, the "auth" and "auth_goopass" or "auth_badpass"

	#  configurations above have to be set to "yes".

	#

	#  The strings below are dynamically expanded, which means that

	#  you can put anything you want in them.  However, note that

	#  this expansion can be slow, and can negatively impact server

	#  performance.

	#

#	msg_goodpass = ""

#	msg_badpass = ""

}

#  The program to execute to do concurrency checks.

checkrad = ${sbindir}/checkrad

# SECURITY CONFIGURATION

#

#  There may be multiple methods of attacking on the server.  This

#  section holds the configuration items which minimize the impact

#  of those attacks

#

security {

	#

	#  max_attributes: The maximum number of attributes

	#  permitted in a RADIUS packet.  Packets which have MORE

	#  than this number of attributes in them will be dropped.

	#

	#  If this number is set too low, then no RADIUS packets

	#  will be accepted.

	#

	#  If this number is set too high, then an attacker may be

	#  able to send a small number of packets which will cause

	#  the server to use all available memory on the machine.

	#

	#  Setting this number to 0 means "allow any number of attributes"

	max_attributes = 200

	#

	#  reject_delay: When sending an Access-Reject, it can be

	#  delayed for a few seconds.  This may help slow down a DoS

	#  attack.  It also helps to slow down people trying to brute-force

	#  crack a users password.

	#

	#  Setting this number to 0 means "send rejects immediately"

	#

	#  If this number is set higher than 'cleanup_delay', then the

	#  rejects will be sent at 'cleanup_delay' time, when the request

	#  is deleted from the internal cache of requests.

	#

	#  Useful ranges: 1 to 5

	reject_delay = 1

	#

	#  status_server: Whether or not the server will respond

	#  to Status-Server requests.

	#

	#  When sent a Status-Server message, the server responds with

	#  an Access-Accept or Accounting-Response packet.

	#

	#  This is mainly useful for administrators who want to "ping"

	#  the server, without adding test users, or creating fake

	#  accounting packets.

	#

	#  It's also useful when a NAS marks a RADIUS server "dead".

	#  The NAS can periodically "ping" the server with a Status-Server

	#  packet.  If the server responds, it must be alive, and the

	#  NAS can start using it for real requests.

	#

	#  See also raddb/sites-available/status

	#

	status_server = yes

}

# PROXY CONFIGURATION

#

#  proxy_requests: Turns proxying of RADIUS requests on or off.

#

#  The server has proxying turned on by default.  If your system is NOT

#  set up to proxy requests to another server, then you can turn proxying

#  off here.  This will save a small amount of resources on the server.

#

#  If you have proxying turned off, and your configuration files say

#  to proxy a request, then an error message will be logged.

#

#  To disable proxying, change the "yes" to "no", and comment the

#  $INCLUDE line.

#

#  allowed values: {no, yes}

#

proxy_requests  = yes

$INCLUDE proxy.conf

# CLIENTS CONFIGURATION

#

#  Client configuration is defined in "clients.conf".

#

#  The 'clients.conf' file contains all of the information from the old

#  'clients' and 'naslist' configuration files.  We recommend that you

#  do NOT use 'client's or 'naslist', although they are still

#  supported.

#

#  Anything listed in 'clients.conf' will take precedence over the

#  information from the old-style configuration files.

#

$INCLUDE clients.conf

# THREAD POOL CONFIGURATION

#

#  The thread pool is a long-lived group of threads which

#  take turns (round-robin) handling any incoming requests.

#

#  You probably want to have a few spare threads around,

#  so that high-load situations can be handled immediately.  If you

#  don't have any spare threads, then the request handling will

#  be delayed while a new thread is created, and added to the pool.

#

#  You probably don't want too many spare threads around,

#  otherwise they'll be sitting there taking up resources, and

#  not doing anything productive.

#

#  The numbers given below should be adequate for most situations.

#

thread pool {

	#  Number of servers to start initially --- should be a reasonable

	#  ballpark figure.

	start_servers = 5

	#  Limit on the total number of servers running.

	#

	#  If this limit is ever reached, clients will be LOCKED OUT, so it

	#  should NOT BE SET TOO LOW.  It is intended mainly as a brake to

	#  keep a runaway server from taking the system with it as it spirals

	#  down...

	#

	#  You may find that the server is regularly reaching the

	#  'max_servers' number of threads, and that increasing

	#  'max_servers' doesn't seem to make much difference.

	#

	#  If this is the case, then the problem is MOST LIKELY that

	#  your back-end databases are taking too long to respond, and

	#  are preventing the server from responding in a timely manner.

	#

	#  The solution is NOT do keep increasing the 'max_servers'

	#  value, but instead to fix the underlying cause of the

	#  problem: slow database, or 'hostname_lookups=yes'.

	#

	#  For more information, see 'max_request_time', above.

	#

	max_servers = 32

	#  Server-pool size regulation.  Rather than making you guess

	#  how many servers you need, FreeRADIUS dynamically adapts to

	#  the load it sees, that is, it tries to maintain enough

	#  servers to handle the current load, plus a few spare

	#  servers to handle transient load spikes.

	#

	#  It does this by periodically checking how many servers are

	#  waiting for a request.  If there are fewer than

	#  min_spare_servers, it creates a new spare.  If there are

	#  more than max_spare_servers, some of the spares die off.

	#  The default values are probably OK for most sites.

	#

	min_spare_servers = 3

	max_spare_servers = 10

	#  When the server receives a packet, it places it onto an

	#  internal queue, where the worker threads (configured above)

	#  pick it up for processing.  The maximum size of that queue

	#  is given here.

	#

	#  When the queue is full, any new packets will be silently

	#  discarded.

	#

	#  The most common cause of the queue being full is that the

	#  server is dependent on a slow database, and it has received

	#  a large "spike" of traffic.  When that happens, there is

	#  very little you can do other than make sure the server

	#  receives less traffic, or make sure that the database can

	#  handle the load.

	#

#	max_queue_size = 65536

	#  There may be memory leaks or resource allocation problems with

	#  the server.  If so, set this value to 300 or so, so that the

	#  resources will be cleaned up periodically.

	#

	#  This should only be necessary if there are serious bugs in the

	#  server which have not yet been fixed.

	#

	#  '0' is a special value meaning 'infinity', or 'the servers never

	#  exit'

	max_requests_per_server = 0

}

# MODULE CONFIGURATION

#

#  The names and configuration of each module is located in this section.

#

#  After the modules are defined here, they may be referred to by name,

#  in other sections of this configuration file.

#

modules {

	#

	#  Each module has a configuration as follows:

	#

	#	name [ instance ] {

	#		config_item = value

	#		...

	#	}

	#

	#  The 'name' is used to load the 'rlm_name' library

	#  which implements the functionality of the module.

	#

	#  The 'instance' is optional.  To have two different instances

	#  of a module, it first must be referred to by 'name'.

	#  The different copies of the module are then created by

	#  inventing two 'instance' names, e.g. 'instance1' and 'instance2'

	#

	#  The instance names can then be used in later configuration

	#  INSTEAD of the original 'name'.  See the 'radutmp' configuration

	#  for an example.

	#

	#

	#  As of 2.0.5, most of the module configurations are in a

	#  sub-directory.  Files matching the regex /[a-zA-Z0-9_.]+/

	#  are loaded.  The modules are initialized ONLY if they are

	#  referenced in a processing section, such as authorize,

	#  authenticate, accounting, pre/post-proxy, etc.

	#

	$INCLUDE ${confdir}/modules/

	#  Extensible Authentication Protocol

	#

	#  For all EAP related authentications.

	#  Now in another file, because it is very large.

	#

	$INCLUDE eap.conf

	#  Include another file that has the SQL-related configuration.

	#  This is another file only because it tends to be big.

	#

#	$INCLUDE sql.conf

	#

	#  This module is an SQL enabled version of the counter module.

	#

	#  Rather than maintaining seperate (GDBM) databases of

	#  accounting info for each counter, this module uses the data

	#  stored in the raddacct table by the sql modules. This

	#  module NEVER does any database INSERTs or UPDATEs.  It is

	#  totally dependent on the SQL module to process Accounting

	#  packets.

	#

#	$INCLUDE sql/mysql/counter.conf

	#

	#  IP addresses managed in an SQL table.

	#

#	$INCLUDE sqlippool.conf

}

# Instantiation

#

#  This section orders the loading of the modules.  Modules

#  listed here will get loaded BEFORE the later sections like

#  authorize, authenticate, etc. get examined.

#

#  This section is not strictly needed.  When a section like

#  authorize refers to a module, it's automatically loaded and

#  initialized.  However, some modules may not be listed in any

#  of the following sections, so they can be listed here.

#

#  Also, listing modules here ensures that you have control over

#  the order in which they are initalized.  If one module needs

#  something defined by another module, you can list them in order

#  here, and ensure that the configuration will be OK.

#

instantiate {

	#

	#  Allows the execution of external scripts.

	#  The entire command line (and output) must fit into 253 bytes.

	#

	#  e.g. Framed-Pool = `%{exec:/bin/echo foo}`

	exec

	#

	#  The expression module doesn't do authorization,

	#  authentication, or accounting.  It only does dynamic

	#  translation, of the form:

	#

	#	Session-Timeout = `%{expr:2 + 3}`

	#

	#  So the module needs to be instantiated, but CANNOT be

	#  listed in any other section.  See 'doc/rlm_expr' for

	#  more information.

	#

	expr

	#

	# We add the counter module here so that it registers

	# the check-name attribute before any module which sets

	# it

#	daily

	expiration

	logintime

	# subsections here can be thought of as "virtual" modules.

	#

	# e.g. If you have two redundant SQL servers, and you want to

	# use them in the authorize and accounting sections, you could

	# place a "redundant" block in each section, containing the

	# exact same text.  Or, you could uncomment the following

	# lines, and list "redundant_sql" in the authorize and

	# accounting sections.

	#

	#redundant redundant_sql {

	#	sql1

	#	sql2

	#}

}

######################################################################

#

#	Policies that can be applied in multiple places are listed

#	globally.  That way, they can be defined once, and referred

#	to multiple times.

#

######################################################################

$INCLUDE policy.conf

######################################################################

#

#	Load virtual servers.

#

#	This next $INCLUDE line loads files in the directory that

#	match the regular expression: /[a-zA-Z0-9_.]+/

#

#	It allows you to define new virtual servers simply by placing

#	a file into the raddb/sites-enabled/ directory.

#

$INCLUDE sites-enabled/

######################################################################

#

#	All of the other configuration sections like "authorize {}",

#	"authenticate {}", "accounting {}", have been moved to the

#	the file:

#

#		raddb/sites-available/default

#

#	This is the "default" virtual server that has the same

#	configuration as in version 1.0.x and 1.1.x.  The default

#	installation enables this virtual server.  You should

#	edit it to create policies for your local site.

#

#	For more documentation on virtual servers, see:

#

#		raddb/sites-available/README

#

######################################################################