Subversion Repositories configs

# For documentation see sane-umax_pp(5)

# GLOBAL #

# size (in bytes) of scan buffer (default: 2 megabyte)

option buffer 2097152

# the following options are local to this scanner

# gain for red channel, if not given, will be automatically computed

# must be between 0 and 15

#option red-gain 8

# gain for green channel, if not given, will be automatically computed

# must be between 0 and 15

#option green-gain 4

# gain for blue channel, if not given, will be automatically computed

# must be between 0 and 15

#option blue-gain 8

# offset for red channel, if not given, will default to 0

# must be between 0 and 15

#option red-offset 2

# offset for green channel, if not given, will default to 0

# must be between 0 and 15

#option green-offset 1

# offset for blue channel, if not given, will default to 0

# must be between 0 and 15

#option blue-offset 1

#

#

# model number

#

# valid values are 610, 1220, 1600 and 2000

#

# by default, no model, we rely on autodetection

# in case you have black or 'inverted' scans,

# you may override detection by providing the

# model number

#option astra 1220

# DEVICES #

# specify the port your scanner is connected to.

#

# the value 'auto' will make the backend find the correct value

# by itself, it will scan  ppdev, ppi device, then hardware address

# 'safe-auto' will do the same but won't do direct hardware access

# on linux systems, you may provide the device name of the ppdev character

# device : /dev/parport0, /dev/parport1, ......

#

# on *BSD, you may provide the device name of the ppi device: /dev/ppi0,

# /dev/ppi1, ...

#

# Possible hardware addresses are 0x378 (lp0)

# 0x278 (lp2) and 0x3c8 (lp1)

#

port safe-auto