Subversion Repositories configs

##############################################################

#  LDAP/ACTIVE DIRECTORY USER PLUGIN SETTINGS

#

# Any of these directives that are required, are only required if the

# userplugin parameter is set to ldap.

# LDAP host name/IP address

# Optional, default = localhost

ldap_host = localhost

# LDAP port

# Optional, default = 389

# Use 636 for ldaps

ldap_port = 389

# LDAP protocol

# Optional, default = ldap

# use 'ldaps' for SSL encryption. Make sure /etc/ldap/ldap.conf is

# configured correctly with TLS_CACERT

ldap_protocol = ldap

# The charset that strings are stored in on the LDAP server. Normally this

# is utf-8, but this can differ according to your setup. The charset specified

# here must be supported by your iconv(1) setup. See iconv -l for all charset

ldap_server_charset = utf-8

# The DN of the user to bind as for normal operations (not used for

# authentication if ldap_authentication_method is set to "bind"

# Optional, default = empty (anonymous bind)

# The userPassword attribute must be readable for this user if the

# ldap_authentication_method option is set to password.

ldap_bind_user = cn=admin,cn=users,dc=ujsoftware,dc=com

# LDAP bind password

# Optional, default = empty (no password)

ldap_bind_passwd = {CRYPT}$2X7KXqudASgY

# The timeout for network operations in seconds

ldap_network_timeout = 30

# When an object (user/group/company) is changed, this attribute will also change:

# Active directory: uSNChanged

# LDAP: modifyTimestamp

ldap_last_modification_attribute = modifyTimestamp

##########

# Object settings

# Top level search base, every object should be available under this tree

ldap_search_base = dc=ujsoftware,dc=com

# attribute name which is/(should: was) used in ldap_user_search_filter

ldap_object_type_attribute = objectClass

ldap_user_type_attribute_value = posixAccount

ldap_group_type_attribute_value = posixGroup

ldap_contact_type_attribute_value = zarafa-contact

ldap_company_type_attribute_value = organizationalUnit

ldap_addresslist_type_attribute_value = zarafa-addresslist

ldap_dynamicgroup_type_attribute_value = zarafa-dynamicgroup

##########

# There should be no need to edit any values below this line

##########

##########

# User settings

# Extra search for users using this LDAP filter.  See ldap_search(3) or RFC

# 2254 for details on the filter syntax.

#

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa users.

#

# Note: This filter should include contacts.

#

# Optional, default = empty (match everything)

# For active directory, use:

#   (objectCategory=Person)

# For LDAP with posix users:

#   no need to use the search filter.

ldap_user_search_filter =

# unique user id for find the user

# Required

# For active directory, use:

#    objectGuid ** WARNING: This WAS: objectSid ** Updates *WILL* fail! **

# For LDAP with posixAccount, use:

#    uidNumber

# Note: contacts also use this field for uniqueness. If you change this,

# you might need to update the zarafa.schema file too, and change

# the MUST uidNumber to whatever you set here.dnl

ldap_user_unique_attribute = uidNumber

# Type of unique user id

# default: text

# For active directory, use:

#		binary

# For LDAP with posix user, use:

#		text

ldap_user_unique_attribute_type = text

# Optional, default = cn

# For active directory, use:

#   cn or displayName

# For LDAP with posix user, use:

#   cn

ldap_fullname_attribute = cn

# Optional, default = uid

# Active directory: sAMAccountName

# LDAP: uid

ldap_loginname_attribute = uid

# Optional, default = userPassword

# Active directory: unicodePwd

# LDAP: userPassword

ldap_password_attribute = userPassword

# If set to bind, users are authenticated by trying to bind to the

# LDAP tree using their username + password.  Otherwise, the

# ldap_password_attribute is requested and checked.

# Optional, default = bind

# Choices: bind, password

# Active directory: bind

# LDAP: password

ldap_authentication_method = password

# Optional, default = mail

# Active directory: mail

# LDAP: mail

ldap_emailaddress_attribute = mail

# Optional, default = zarafaAliases

# Active directory: zarafaAliases

# LDAP: zarafaAliases

ldap_emailaliases_attribute = zarafaAliases

# Whether the user is an admin.  The field is interpreted as a

# boolean, 0 and false (case insensitive) meaning no, all other values

# yes.

# Optional, default = zarafaAdmin

# Active directory: zarafaAdmin

# LDAP: zarafaAdmin

ldap_isadmin_attribute = zarafaAdmin

# Whether a user is a non-active user. This means that the user will

# not count towards your user count, but the user will also not be

# able to log in

# Optional, default = empty

# Active directory: zarafaSharedStoreOnly

# LDAP: zarafaSharedStoreOnly

ldap_nonactive_attribute =

# A nonactive store, or resource, can be specified to be a user, room or equipment.

# Set it to 'room' or 'equipment' to make such types. If set to empty,

# or wrong word, or 'user' it will be a nonactive user.

# Optional, default = zarafaResourceType

# Active directory: zarafaResourceType

# LDAP: zarafaResourceType

ldap_resource_type_attribute = zarafaResourceType

# Numeric resource capacity

# Optional, default = zarafaResourceCapacity

# Active directory: zarafaResourceCapacity

# LDAP: zarafaResourceCapacity

ldap_resource_capacity_attribute = zarafaResourceCapacity

# Optional

# The attribute which indicates which users are allowed

# to send on behalf of the selected user

ldap_sendas_attribute = zarafaSendAsPrivilege

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_sendas_attribute_type = text

# The attribute of the user and group which is listed in

# the ldap_sendas_attribute

# Empty default, using ldap_user_unique_attribute

ldap_sendas_relation_attribute =

# Optional, default = userCertificate

# Active directory: userCertificate

# LDAP: userCertificate

ldap_user_certificate_attribute = userCertificate

# Load extra user properties from the propmap file

!propmap /etc/zarafa/ldap.propmap.cfg

##########

# Group settings

# Search for groups using this LDAP filter.  See ldap_search(3) for

# details on the filter syntax.

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa groups.

# Optional, default = empty (match everything)

# For active directory, use:

#   (objectCategory=Group)

# For LDAP with posix groups, use:

#   no need to set the search filter

ldap_group_search_filter =

# unique group id for find the group

# Required

# For active directory, use:

#    objectSid

# For LDAP with posix group, use:

#    gidNumber

ldap_group_unique_attribute = gidNumber

# Type of unique group id

# default: text

# For active directory, use:

#		binary

# For LDAP with posix group, use:

#		text

ldap_group_unique_attribute_type = text

# Optional, default = cn

# Active directory: cn

# LDAP: cn

ldap_groupname_attribute = cn

# Optional, default = member

# Active directory: member

# LDAP: memberUid

ldap_groupmembers_attribute = memberUid

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_groupmembers_attribute_type = text

# The attribute of the user which is listed in ldap_groupmember_attribute

# Active directory: empty, matching dn's

# LDAP: uidNumber, matching users in ldap_user_unique_attribute

ldap_groupmembers_relation_attribute = uidNumber

# A group can also be used for security, eg. setting permissions on folders.

# This makes a group a security group. The zarafaSecurityGroup value is boolean.

# Optional, default = zarafaSecurityGroup

# Active directory = groupType

# LDAP: zarafaSecurityGroup

ldap_group_security_attribute = zarafaSecurityGroup

# In ADS servers, a special bitmask action is required on the groupType field.

# This is actived by setting the ldap_group_security_attribute_type to `''ads`''

# Otherwise, just the presence of the field will make the group security enabled.

# Optional, default = boolean

# Active directory = ads

# LDAP: boolean

ldap_group_security_attribute_type = boolean

##########

# Company settings

# Search for companies using this LDAP filter.

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa companies.

# Optional, default = empty (match everything)

# For active directory, use:

#   (objectCategory=Company)

# For LDAP with posix users, use:

#   no need to set the filter

ldap_company_search_filter =

# unique company id for find the company

# Active directory: objectGUID

# LDAP: ou

ldap_company_unique_attribute = ou

# Optional, default = text

# Active directory: binary

# LDAP: text

ldap_company_unique_attribute_type = text

# Optional, default = ou

# Active directory: ou

# LDAP: ou

ldap_companyname_attribute = ou

# Optional

# The attribute which indicates which companies are allowed

# to view the members of the selected company

ldap_company_view_attribute = zarafaViewPrivilege

# Optional, default = text

ldap_company_view_attribute_type = text

# The attribute of the company which is listed in the

# ldap_company_view_attribute

# Empty default, using ldap_company_unique_attribute

ldap_company_view_relation_attribute =

# Optional

# The attribute which indicates which users from different companies

# are administrator over the selected company.

ldap_company_admin_attribute = zarafaAdminPrivilege

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_company_admin_attribute_type = text

# The attribute of the company which is listed in the

# ldap_company_admin_attribute

# Empty default, using ldap_user_unique_attribute

ldap_company_admin_relation_attribute =

# The attribute which indicates which user is the system administrator

# for the specified company.

ldap_company_system_admin_attribute = zarafaSystemAdmin

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_company_system_admin_attribute_type = text

# The attribute of the company which is listed in the

# ldap_company_system_admin attribute

# Empty default, using ldap_user_unique_attribute

ldap_company_system_admin_relation_attribute =

##########

# Addresslist settings

# Add a filter to the addresslist search

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa addresslists.

# Optional, default = empty (match everything)

ldap_addresslist_search_filter =

# This is the unique attribute of a addresslist which is never going

# to change, unless the addresslist is removed from LDAP. When this

# value changes, Zarafa will remove the previous addresslist from the

# database, and create a new addresslist with this unique value

ldap_addresslist_unique_attribute = cn

# This value can be 'text' or 'binary'. For OpenLDAP, only text is used.

ldap_addresslist_unique_attribute_type = text

# This is the name of the attribute on the addresslist object that

# specifies the filter to be applied for this addresslist. All users

# matching this filter AND matching the default

# ldap_user_search_filter will be included in the addresslist

ldap_addresslist_filter_attribute = zarafaFilter

# This is the name of the attribute on the addresslist object that

# specifies the search base to be applied for this addresslist.

ldap_addresslist_search_base_attribute = zarafaBase

# The attribute containing the name of the addresslist

ldap_addresslist_name_attribute = cn

##########

# Dynamicgroup settings

# Add a filter to the dynamicgroup search

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa dynamic groups.

# Optional, default = empty (match everything)

ldap_dynamicgroup_search_filter =

# This is the unique attribute of a dynamicgroup which is never going

# to change, unless the dynamicgroup is removed from LDAP. When this

# value changes, Zarafa will remove the previous dynamicgroup from the

# database, and create a new dynamicgroup with this unique value

ldap_dynamicgroup_unique_attribute = cn

# This value can be 'text' or 'binary'. For OpenLDAP, only text is used.

ldap_dynamicgroup_unique_attribute_type = text

# This is the name of the attribute on the dynamicgroup object that

# specifies the filter to be applied for this dynamicgroup. All users

# matching this filter AND matching the default

# ldap_user_search_filter will be included in the dynamicgroup

ldap_dynamicgroup_filter_attribute = zarafaFilter

# This is the name of the attribute on the dynamicgroup object that

# specifies the search base to be applied for this dynamicgroup.

ldap_dynamicgroup_search_base_attribute = zarafaBase

# The attribute containing the name of the dynamicgroup

ldap_dynamicgroup_name_attribute = cn

##########

# Quota settings

# Optional

# The attribute which indicates which users (besides the user who exceeds his quota)

# should also receive a warning mail when a user exceeds his quota.

ldap_quota_userwarning_recipients_attribute = zarafaQuotaUserWarningRecipients

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_quota_userwarning_recipients_attribute_type = text

# Optional, default empty

ldap_quota_userwarning_recipients_relation_attribute =

# Optional

# The attribute which indicates which users should receive a warning mail

# when a company exceeds his quota.

ldap_quota_companywarning_recipients_attribute = zarafaQuotaCompanyWarningRecipients

# Optional, default = text

# Active directory: dn

# LDAP: text

ldap_quota_companywarning_recipients_attribute_type = text

# Optional, default empty

ldap_quota_companywarning_recipients_relation_attribute =

# Whether to override the system wide quota settings

ldap_quotaoverride_attribute = zarafaQuotaOverride

ldap_warnquota_attribute = zarafaQuotaWarn

ldap_softquota_attribute = zarafaQuotaSoft

ldap_hardquota_attribute = zarafaQuotaHard

# Whether to override the system wide quota settings for all users within the company

ldap_userdefault_quotaoverride_attribute = zarafaUserDefaultQuotaOverride

ldap_userdefault_warnquota_attribute = zarafaUserDefaultQuotaWarn

ldap_userdefault_softquota_attribute = zarafaUserDefaultQuotaSoft

ldap_userdefault_hardquota_attribute = zarafaUserDefaultQuotaHard

# Mapping from the quota attributes to a number of bytes.  Qmail-LDAP

# schema uses bytes (1), ADS uses kilobytes (1024*1024).

ldap_quota_multiplier = 1

##########

# Misc. settings

# Attribute which indicates if the user should be hidden from addressbook

ldap_addressbook_hide_attribute = zarafaHidden

# LDAP object search filter. %s in this filter will be replaced with

# the object being searched.

# Hint: Use the zarafaAccount attribute in the filter to differentiate

# between non-zarafa and zarafa objects.

# Default: empty

# ADS recommended: (anr=%s)

# OpenLDAP optional: (|(mail=%s*)(uid=%s*)(cn=*%s*)(fullname=*%s*)(givenname=*%s*)(lastname=*%s*)(sn=*%s*))

ldap_object_search_filter =

# If a request want more objects than this value, it will download the

# full ldap tree (from the base with the search filter) and discard

# wat was not required. This is faster for large requests.

# Default: 1000

ldap_filter_cutoff_elements = 1000