Subversion Repositories configs

[General]

# Default adapter name

# Defaults to 'BlueZ X.YZ'

#Name = BlueZ

# Default device class. Only the major and minor device class bits are

# considered. Defaults to '0x000000'.

#Class = 0x000100

# How long to stay in discoverable mode before going back to non-discoverable

# The value is in seconds. Default is 180, i.e. 3 minutes.

# 0 = disable timer, i.e. stay discoverable forever

#DiscoverableTimeout = 0

# Always allow pairing even if there are no agent registered

# Possible values: true, false

# Default: false

#AlwaysPairable = false

# How long to stay in pairable mode before going back to non-discoverable

# The value is in seconds. Default is 0.

# 0 = disable timer, i.e. stay pairable forever

#PairableTimeout = 0

# Use vendor id source (assigner), vendor, product and version information for

# DID profile support. The values are separated by ":" and assigner, VID, PID

# and version.

# Possible vendor id source values: bluetooth, usb (defaults to usb)

#DeviceID = bluetooth:1234:5678:abcd

# Do reverse service discovery for previously unknown devices that connect to

# us. For BR/EDR this option is really only needed for qualification since the

# BITE tester doesn't like us doing reverse SDP for some test cases, for LE

# this disables the GATT client functionally so it can be used in system which

# can only operate as peripheral.

# Defaults to 'true'.

#ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need

# remote devices name and want shorter discovery cycle. Defaults to 'true'.

#NameResolving = true

# Enable runtime persistency of debug link keys. Default is false which

# makes debug link keys valid only for the duration of the connection

# that they were created for.

#DebugKeys = false

# Restricts all controllers to the specified transport. Default value

# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).

# Possible values: "dual", "bredr", "le"

#ControllerMode = dual

# Enables Multi Profile Specification support. This allows to specify if

# system supports only Multiple Profiles Single Device (MPSD) configuration

# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple

# Devices (MPMD) configurations.

# Possible values: "off", "single", "multiple"

#MultiProfile = off

# Permanently enables the Fast Connectable setting for adapters that

# support it. When enabled other devices can connect faster to us,

# however the tradeoff is increased power consumptions. This feature

# will fully work only on kernel version 4.1 and newer. Defaults to

# 'false'.

#FastConnectable = false

# Default privacy setting.

# Enables use of private address.

# Possible values: "off", "device", "network"

# "network" option not supported currently

# Defaults to "off"

# Privacy = off

[GATT]

# GATT attribute cache.

# Possible values:

# always: Always cache attributes even for devices not paired, this is

# recommended as it is best for interoperability, with more consistent

# reconnection times and enables proper tracking of notifications for all

# devices.

# yes: Only cache attributes of paired devices.

# no: Never cache attributes

# Default: always

#Cache = always

# Minimum required Encryption Key Size for accessing secured characteristics.

# Possible values: 0 and 7-16. 0 means don't care.

# Defaults to 0

#KeySize = 0

# Exchange MTU size.

# Possible values: 23-517

# Defaults to 517

#ExchangeMTU = 517

[Policy]

#

# The ReconnectUUIDs defines the set of remote services that should try

# to be reconnected to in case of a link loss (link supervision

# timeout). The policy plugin should contain a sane set of values by

# default, but this list can be overridden here. By setting the list to

# empty the reconnection feature gets disabled.

#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb

# ReconnectAttempts define the number of attempts to reconnect after a link

# lost. Setting the value to 0 disables reconnecting feature.

#ReconnectAttempts=7

# ReconnectIntervals define the set of intervals in seconds to use in between

# attempts.

# If the number of attempts defined in ReconnectAttempts is bigger than the

# set of intervals the last interval is repeated until the last attempt.

#ReconnectIntervals=1,2,4,8,16,32,64

# AutoEnable defines option to enable all controllers when they are found.

# This includes adapters present on start as well as adapters that are plugged

# in later on. Defaults to 'false'.

AutoEnable=true