WebSVN – configs – Blame – /homeserver8/etc/sane.d/canon_dr.conf

Rev	Author	Line No.	Line
192	-	1	`#######################################################################`
		2	`# NOTE: 'option' lines only apply to the devices found by`
		3	`# the NEXT 'usb' or 'scsi' line. You may repeat the option line if`
		4	`# required for multiple scanners of different models/connections.`
		5
		6	`#######################################################################`
		7	`# Some machines are incapable of providing basic inquiry info, and will`
		8	`# lock up if asked for it. The driver will not ask for this info if all`
		9	`# three of these options are provided. They should NOT be used unless`
		10	`# you know for sure that your machine requires it.`
		11	`# NOTE: the vendor and model must be correct. The version need not.`
		12	`#option vendor-name CANON`
		13	`#option model-name DR-2050C`
		14	`#option version-name XXXX`
		15
		16	`#######################################################################`
		17	`# Set data buffer size, in bytes. The value ranges from 4096 - infinity`
		18	`# Large values may cause timeouts, or long pauses at the end of each`
		19	`# page. Small values may cause slow scans. 2MB is the default.`
		20	`#option buffer-size 2097152`
		21
		22	`#######################################################################`
		23	`# Most scanners dont pad their reads`
		24	`#option padded-read 0`
		25
		26	`#######################################################################`
		27	`# SCSI scanners:`
		28
		29	`# To search for any CANON scsi device, if name starts with 'CR' or 'DR'`
		30	`scsi CANON CR`
		31	`scsi CANON DR`
		32
		33	`# To use a specific scsi device`
		34	`#scsi /dev/sg1`
		35
		36	`#######################################################################`
		37	`# USB scanners:`
		38
		39	`# For Canon scanners connected via USB on a known device (kernel driver):`
		40	`#usb /dev/usb/scanner0`
		41
		42	`# For Canon scanners connected via USB using vendor and device ids (libusb):`
		43	`#usb VENDORID PRODUCTID`
		44
		45	`# NOTE: if you have to add your device here- please send the id and model`
		46	`# to the author via email, so it can be included in next version. kitno455 at`
		47	`# gmail dot com - with canon_dr in the subject line`
		48
		49	`# DR-2080C (uses weird protocol)`
		50	`option duplex-offset 840`
		51	`option vendor-name CANON`
		52	`option model-name DR-2080C`
		53	`option version-name XXXX`
		54	`option padded-read 1`
		55	`usb 0x04a9 0x1601`
		56
		57	`# CR-180`
		58	`usb 0x04a9 0x1602`
		59
		60	`# DR-9080C`
		61	`usb 0x04a9 0x1603`
		62
		63	`# DR-7080C`
		64	`usb 0x04a9 0x1604`
		65
		66	`# DR-5010C`
		67	`usb 0x04a9 0x1606`
		68
		69	`# DR-6080C`
		70	`usb 0x04a9 0x1607`
		71
		72	`# DR-2580C`
		73	`option duplex-offset 432`
		74	`usb 0x04a9 0x1608`
		75
		76	`# DR-3080CII`
		77	`option padded-read 1`
		78	`usb 0x04a9 0x1609`
		79
		80	`# DR-2050C/SP (uses weird protocol)`
		81	`option duplex-offset 840`
		82	`option vendor-name CANON`
		83	`option model-name DR-2050C`
		84	`option version-name XXXX`
		85	`option padded-read 1`
		86	`usb 0x04a9 0x160a`
		87
		88	`# DR-7580`
		89	`usb 0x04a9 0x160b`
		90
		91	`# CR-55`
		92	`usb 0x1083 0x160c`
		93
		94	`# DR-1210C (two versions?)`
		95	`usb 0x1083 0x160f`
		96	`usb 0x04a9 0x2222`
		97
		98	`# DR-4010C`
		99	`usb 0x1083 0x1614`
		100
		101	`# DR-2510C`
		102	`option duplex-offset 400`
		103	`usb 0x1083 0x1617`
		104
		105	`# DR-X10C`
		106	`usb 0x1083 0x1618`
		107
		108	`# CR-25`
		109	`usb 0x1083 0x161a`
		110
		111	`# DR-2010C`
		112	`option duplex-offset 400`
		113	`usb 0x1083 0x161b`
		114
		115	`# DR-3010C`
		116	`option duplex-offset 400`
		117	`usb 0x1083 0x161d`
		118
		119	`# DR-7090C`
		120	`usb 0x1083 0x1620`
		121
		122	`# DR-9050C`
		123	`usb 0x1083 0x1622`
		124
		125	`# DR-7550C`
		126	`usb 0x1083 0x1623`
		127
		128	`# DR-6050C`
		129	`usb 0x1083 0x1624`
		130
		131	`# DR-6010C`
		132	`usb 0x1083 0x1626`
		133
		134	`# CR-190i`
		135	`usb 0x1083 0x162b`
		136
		137	`# P-150M`
		138	`usb 0x1083 0x162c`
		139
		140	`# DR-6030C`
		141	`usb 0x1083 0x1638`
		142
		143	`# CR-135i`
		144	`usb 0x1083 0x1639`
		145
		146	`# DR-M160`
		147	`option extra-status 1`
		148	`option duplex-offset 400`
		149	`usb 0x1083 0x163e`
		150
		151	`# DR-M140`
		152	`option extra-status 1`
		153	`option duplex-offset 400`
		154	`usb 0x1083 0x163f`
		155
		156	`# DR-C125`
		157	`option duplex-offset 400`
		158	`usb 0x1083 0x1640`
		159
		160	`# DR-P215`
		161	`usb 0x1083 0x1641`
		162
		163	`# P-215`
		164	`usb 0x1083 0x1646`
		165
		166	`# FSU-201`
		167	`usb 0x1083 0x1648`
		168
		169	`# DR-C130`
		170	`usb 0x1083 0x164a`
		171
		172	`# DR-P208`
		173	`usb 0x1083 0x164b`
		174
		175	`# P-208`
		176	`usb 0x1083 0x164c`
		177
		178	`# DR-G1130`
		179	`option buffer-size 8000000`
		180	`usb 0x1083 0x164f`
		181
		182	`# DR-G1100`
		183	`option buffer-size 8000000`
		184	`usb 0x1083 0x1650`
		185
		186	`# DR-C120`
		187	`usb 0x1083 0x1651`
		188
		189	`# P-201`
		190	`usb 0x1083 0x1652`
		191
		192	`# DR-F120`
		193	`option duplex-offset 1640`
		194	`usb 0x1083 0x1654`
		195
		196	`# DR-M1060`
		197	`usb 0x1083 0x1657`
		198
		199	`# DR-C225`
		200	`usb 0x1083 0x1658`
		201
		202	`# DR-P215II`
		203	`usb 0x1083 0x1659`
		204
		205	`# P-215II`
		206	`usb 0x1083 0x165b`
		207
		208	`# DR-P208II`
		209	`usb 0x1083 0x165d`
		210
		211	`# P-208II`
		212	`usb 0x1083 0x165f`

Subversion Repositories configs

(root)/homeserver8/etc/sane.d/canon_dr.conf – Rev 192