Subversion Repositories configs

# U12-SANE Backend configuration file

#

# each device needs at least two lines:

# - [usb] vendor-ID and product-ID

# - device devicename

# i.e. for Plustek (0x07B3) U1212 (0x0001)

# [usb] 0x07B3 0x0001

# device /dev/usbscanner

# or

# device libusb:bbb:ddd

# where bbb is the busnumber and ddd the device number

# make sure that your user has access to /proc/bus/usb/bbb/ddd

#

# additionally you can specify some options

# warmup, lOffOnEnd, lampOff

#

# For autodetection use

# [usb]

# device /dev/usbscanner

#

# or simply

# [usb]

#

# or if you want a specific device but you have no idea about the

# device node or you use libusb, simply set vendor- and product-ID

# [usb] 0x07B3 0x0001

# device auto

#

# NOTE: autodetection is safe, as it uses the info it got

#       from the USB subsystem. If you're not using the

#       autodetection, you MUST have attached that device

#       at your USB-port, that you have specified...

#

[usb]

#

# options for the previous USB entry

#

# switch lamp off after xxx secs, 0 disables the feature

option lampOff 300

# warmup period in seconds, 0 means no warmup

option warmup 15

# 0 means leave lamp-status untouched, not 0 means switch off

# on sane_close

option lOffOnEnd 1

#

# for adjusting the default gamma values

#

#option redGamma         1.5

#option greenGamma       1.5

#option blueGamma        1.5

#option grayGamma        1.5

#

# and of course the device-name

#

device auto

#

# to define a new device, start with a new section:

# [usb]

#