Subversion Repositories configs

#
# Copyright (c) 1998-2004, 2009 Sendmail, Inc. and its suppliers.
#       All rights reserved.
# Copyright (c) 1983, 1995 Eric P. Allman.  All rights reserved.
# Copyright (c) 1988, 1993
#       The Regents of the University of California.  All rights reserved.
#
# By using this file, you agree to the terms and conditions set
# forth in the LICENSE file which can be found at the top level of
# the sendmail distribution.
#
#

######################################################################
######################################################################
#####
#####           SENDMAIL CONFIGURATION FILE
#####
######################################################################
#####
#####   DO NOT EDIT THIS FILE!  Only edit the source .mc file.
#####
######################################################################
######################################################################

#####  $Id: cfhead.m4,v 8.120 2009/01/23 22:39:21 ca Exp $  #####
#####  $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $  #####
#####  linux setup  #####
#####  $Id: use_ct_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $  #####

#####  $Id: msp.m4,v 1.33 2004/02/09 22:32:38 ca Exp $  #####

#####  $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $  #####


#####  $Id: proto.m4,v 8.741 2009/12/11 00:04:53 ca Exp $  #####

# level 10 config file format
V10/Berkeley

# override file safeties - setting this option compromises system security,
# addressing the actual file configuration problem is preferred
# need to set this before any file actions are encountered in the cf file
#O DontBlameSendmail=safe

# default LDAP map specification
# need to set this now before any LDAP maps are defined
#O LDAPDefaultSpec=-h localhost

##################
#   local info   #
##################

# my LDAP cluster
# need to set this before any LDAP lookups are done (including classes)
#D{sendmailMTACluster}$m

Cwlocalhost

# my official domain name
# ... define this only if sendmail cannot automatically determine your domain
#Dj$w.Foo.COM

# host/domain names ending with a token in class P are canonical
CP.

# "Smart" relay host (may be null)
DS


# operators that cannot be in local usernames (i.e., network indicators)
CO @ % !

# a class with just dot (for identifying canonical names)
C..

# a class with just a left bracket (for identifying domain literals)
C[[


# Resolve map (to check if a host exists in check_mail)
Kresolve host -a<OKR> -T<TEMP>
C{ResOk}OKR


# Hosts for which relaying is permitted ($=R)
FR-o /etc/mail/relay-domains

# arithmetic map
Karith arith





# dequoting map
Kdequote dequote

# class E: names that should be exposed as from this host, even if we masquerade
# class L: names that should be delivered locally, even if we have a relay
# class M: domains that should be converted to $M
# class N: domains that should not be converted to $M
#CL root



# my name for error messages
DnMAILER-DAEMON


D{MTAHost}[127.0.0.1]


# Configuration version number
DZ8.14.4/Submit


###############
#   Options   #
###############

# strip message body to 7 bits on input?
O SevenBitInput=False

# 8-bit data handling
#O EightBitMode=pass8

# wait for alias file rebuild (default units: minutes)
O AliasWait=10

# location of alias file
#O AliasFile=/etc/mail/aliases

# minimum number of free blocks on filesystem
O MinFreeBlocks=100

# maximum message size
#O MaxMessageSize=0

# substitution for space (blank) characters
O BlankSub=.

# avoid connecting to "expensive" mailers on initial submission?
O HoldExpensive=False

# checkpoint queue runs after every N successful deliveries
#O CheckpointInterval=10

# default delivery mode
O DeliveryMode=i

# error message header/file
#O ErrorHeader=/etc/mail/error-header

# error mode
#O ErrorMode=print

# save Unix-style "From_" lines at top of header?
#O SaveFromLine=False

# queue file mode (qf files)
O QueueFileMode=0660

# temporary file mode
O TempFileMode=0600

# match recipients against GECOS field?
#O MatchGECOS=False

# maximum hop count
#O MaxHopCount=25

# location of help file
O HelpFile=/etc/mail/helpfile

# ignore dots as terminators in incoming messages?
#O IgnoreDots=False

# name resolver options
#O ResolverOptions=+AAONLY

# deliver MIME-encapsulated error messages?
O SendMimeErrors=True

# Forward file search path
O ForwardPath

# open connection cache size
O ConnectionCacheSize=2

# open connection cache timeout
O ConnectionCacheTimeout=5m

# persistent host status directory
#O HostStatusDirectory=.hoststat

# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery=False

# use Errors-To: header?
O UseErrorsTo=False

# log level
O LogLevel=9

# send to me too, even in an alias expansion?
#O MeToo=True

# verify RHS in newaliases?
O CheckAliases=False

# default messages to old style headers if no special punctuation?
O OldStyleHeaders=True

# SMTP daemon options

O DaemonPortOptions=Name=NoMTA, Addr=127.0.0.1, M=E

# SMTP client options
#O ClientPortOptions=Family=inet, Address=0.0.0.0

# Modifiers to define {daemon_flags} for direct submissions
#O DirectSubmissionModifiers

# Use as mail submission program? See sendmail/SECURITY
O UseMSP=True

# privacy flags
O PrivacyOptions=goaway,noetrn,restrictqrun

# who (if anyone) should get extra copies of error messages
#O PostmasterCopy=Postmaster

# slope of queue-only function
#O QueueFactor=600000

# limit on number of concurrent queue runners
#O MaxQueueChildren

# maximum number of queue-runners per queue-grouping with multiple queues
#O MaxRunnersPerQueue=1

# priority of queue runners (nice(3))
#O NiceQueueRun

# shall we sort the queue by hostname first?
#O QueueSortOrder=priority

# minimum time in queue before retry
#O MinQueueAge=30m

# how many jobs can you process in the queue?
#O MaxQueueRunSize=0

# perform initial split of envelope without checking MX records
#O FastSplit=1

# queue directory
O QueueDirectory=/var/spool/clientmqueue

# key for shared memory; 0 to turn off, -1 to auto-select
#O SharedMemoryKey=0

# file to store auto-selected key for shared memory (SharedMemoryKey = -1)
#O SharedMemoryKeyFile

# timeouts (many of these)
#O Timeout.initial=5m
#O Timeout.connect=5m
#O Timeout.aconnect=0s
#O Timeout.iconnect=5m
#O Timeout.helo=5m
#O Timeout.mail=10m
#O Timeout.rcpt=1h
#O Timeout.datainit=5m
#O Timeout.datablock=1h
#O Timeout.datafinal=1h
#O Timeout.rset=5m
#O Timeout.quit=2m
#O Timeout.misc=2m
#O Timeout.command=1h
#O Timeout.ident=5s
#O Timeout.fileopen=60s
#O Timeout.control=2m
O Timeout.queuereturn=5d
#O Timeout.queuereturn.normal=5d
#O Timeout.queuereturn.urgent=2d
#O Timeout.queuereturn.non-urgent=7d
#O Timeout.queuereturn.dsn=5d
O Timeout.queuewarn=4h
#O Timeout.queuewarn.normal=4h
#O Timeout.queuewarn.urgent=1h
#O Timeout.queuewarn.non-urgent=12h
#O Timeout.queuewarn.dsn=4h
#O Timeout.hoststatus=30m
#O Timeout.resolver.retrans=5s
#O Timeout.resolver.retrans.first=5s
#O Timeout.resolver.retrans.normal=5s
#O Timeout.resolver.retry=4
#O Timeout.resolver.retry.first=4
#O Timeout.resolver.retry.normal=4
#O Timeout.lhlo=2m
#O Timeout.auth=10m
#O Timeout.starttls=1h

# time for DeliverBy; extension disabled if less than 0
#O DeliverByMin=0

# should we not prune routes in route-addr syntax addresses?
#O DontPruneRoutes=False

# queue up everything before forking?
O SuperSafe=True

# status file
O StatusFile=/var/spool/clientmqueue/sm-client.st

# time zone handling:
#  if undefined, use system default
#  if defined but null, use TZ envariable passed in
#  if defined and non-null, use that info
O TimeZoneSpec=

# default UID (can be username or userid:groupid)
#O DefaultUser=mailnull

# list of locations of user database file (null means no lookup)
#O UserDatabaseSpec=/etc/mail/userdb

# fallback MX host
#O FallbackMXhost=fall.back.host.net

# fallback smart host
#O FallbackSmartHost=fall.back.host.net

# if we are the best MX host for a site, try it directly instead of config err
#O TryNullMXList=False

# load average at which we just queue messages
#O QueueLA=8

# load average at which we refuse connections
#O RefuseLA=12

# log interval when refusing connections for this long
#O RejectLogInterval=3h

# load average at which we delay connections; 0 means no limit
#O DelayLA=0

# maximum number of children we allow at one time
#O MaxDaemonChildren=0

# maximum number of new connections per second
#O ConnectionRateThrottle=0

# Width of the window 
#O ConnectionRateWindowSize=60s

# work recipient factor
#O RecipientFactor=30000

# deliver each queued job in a separate process?
#O ForkEachJob=False

# work class factor
#O ClassFactor=1800

# work time factor
#O RetryFactor=90000

# default character set
#O DefaultCharSet=unknown-8bit

# service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
#O ServiceSwitchFile=/etc/mail/service.switch

# hosts file (normally /etc/hosts)
#O HostsFile=/etc/hosts

# dialup line delay on connection failure
#O DialDelay=0s

# action to take if there are no recipients in the message
#O NoRecipientAction=none

# chrooted environment for writing to files
#O SafeFileEnvironment

# are colons OK in addresses?
#O ColonOkInAddr=True

# shall I avoid expanding CNAMEs (violates protocols)?
#O DontExpandCnames=False

# SMTP initial login message (old $e macro)
O SmtpGreetingMessage=$j Sendmail $v/$Z; $b

# UNIX initial From header format (old $l macro)
O UnixFromLine=From $g $d

# From: lines that have embedded newlines are unwrapped onto one line
#O SingleLineFromHeader=False

# Allow HELO SMTP command that does not include a host name
#O AllowBogusHELO=False

# Characters to be quoted in a full name phrase (@,;:\()[] are automatic)
#O MustQuoteChars=.

# delimiter (operator) characters (old $o macro)
O OperatorChars=.:%@!^/[]+

# shall I avoid calling initgroups(3) because of high NIS costs?
O DontInitGroups=True

# are group-writable :include: and .forward files (un)trustworthy?
# True (the default) means they are not trustworthy.
#O UnsafeGroupWrites=True


# where do errors that occur when sending errors get sent?
#O DoubleBounceAddress=postmaster

# issue temporary errors (4xy) instead of permanent errors (5xy)?
#O SoftBounce=False

# where to save bounces if all else fails
#O DeadLetterDrop=/var/tmp/dead.letter

# what user id do we assume for the majority of the processing?
O RunAsUser=smmsp

# maximum number of recipients per SMTP envelope
#O MaxRecipientsPerMessage=0

# limit the rate recipients per SMTP envelope are accepted
# once the threshold number of recipients have been rejected
#O BadRcptThrottle=0


# shall we get local names from our installed interfaces?
O DontProbeInterfaces=True

# Return-Receipt-To: header implies DSN request
#O RrtImpliesDsn=False

# override connection address (for testing)
#O ConnectOnlyTo=0.0.0.0

# Trusted user for file ownership and starting the daemon
O TrustedUser=smmsp

# Control socket for daemon management
#O ControlSocketName=/var/spool/mqueue/.control

# Maximum MIME header length to protect MUAs
#O MaxMimeHeaderLength=0/0

# Maximum length of the sum of all headers
#O MaxHeadersLength=32768

# Maximum depth of alias recursion
#O MaxAliasRecursion=10

# location of pid file
O PidFile=/var/run/sm-client.pid

# Prefix string for the process title shown on 'ps' listings
#O ProcessTitlePrefix=prefix

# Data file (df) memory-buffer file maximum size
#O DataFileBufferSize=4096

# Transcript file (xf) memory-buffer file maximum size
#O XscriptFileBufferSize=4096

# lookup type to find information about local mailboxes
#O MailboxDatabase=pw

# override compile time flag REQUIRES_DIR_FSYNC
#O RequiresDirfsync=true

# list of authentication mechanisms
#O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5

# Authentication realm
#O AuthRealm

# default authentication information for outgoing connections
#O DefaultAuthInfo=/etc/mail/default-auth-info

# SMTP AUTH flags
#O AuthOptions

# SMTP AUTH maximum encryption strength
#O AuthMaxBits

# SMTP STARTTLS server options
#O TLSSrvOptions


# Input mail filters
#O InputMailFilters


# CA directory
#O CACertPath
# CA file
#O CACertFile
# Server Cert
#O ServerCertFile
# Server private key
#O ServerKeyFile
# Client Cert
#O ClientCertFile
# Client private key
#O ClientKeyFile
# File containing certificate revocation lists 
#O CRLFile
# DHParameters (only required if DSA/DH is used)
#O DHParameters
# Random data source (required for systems without /dev/urandom under OpenSSL)
#O RandFile

# Maximum number of "useless" commands before slowing down
#O MaxNOOPCommands=20

# Name to use for EHLO (defaults to $j)
#O HeloName

############################
# QUEUE GROUP DEFINITIONS  #
############################


###########################
#   Message precedences   #
###########################

Pfirst-class=0
Pspecial-delivery=100
Plist=-30
Pbulk=-60
Pjunk=-100

#####################
#   Trusted users   #
#####################

# this is equivalent to setting class "t"
Ft/etc/mail/trusted-users
Troot
Tdaemon
Tuucp

#########################
#   Format of headers   #
#########################

H?P?Return-Path: <$g>
HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
        $.$?{auth_type}(authenticated$?{auth_ssf} bits=${auth_ssf}$.)
        $.by $j ($v/$Z)$?r with $r$. id $i$?{tls_version}
        (version=${tls_version} cipher=${cipher} bits=${cipher_bits} verify=${verify})$.$?u
        for $u; $|;
        $.$b
H?D?Resent-Date: $a
H?D?Date: $a
H?F?Resent-From: $?x$x <$g>$|$g$.
H?F?From: $?x$x <$g>$|$g$.
H?x?Full-Name: $x
# HPosted-Date: $a
# H?l?Received-Date: $b
H?M?Resent-Message-Id: <$t.$i@$j>
H?M?Message-Id: <$t.$i@$j>

#
######################################################################
######################################################################
#####
#####                   REWRITING RULES
#####
######################################################################
######################################################################

############################################
###  Ruleset 3 -- Name Canonicalization  ###
############################################
Scanonify=3

# handle null input (translate to <@> special case)
R$@                     $@ <@>

# strip group: syntax (not inside angle brackets!) and trailing semicolon
R$*                     $: $1 <@>                       mark addresses
R$* < $* > $* <@>       $: $1 < $2 > $3                 unmark <addr>
R@ $* <@>               $: @ $1                         unmark @host:...
R$* [ IPv6 : $+ ] <@>   $: $1 [ IPv6 : $2 ]             unmark IPv6 addr
R$* :: $* <@>           $: $1 :: $2                     unmark node::addr
R:include: $* <@>       $: :include: $1                 unmark :include:...
R$* : $* [ $* ]         $: $1 : $2 [ $3 ] <@>           remark if leading colon
R$* : $* <@>            $: $2                           strip colon if marked
R$* <@>                 $: $1                           unmark
R$* ;                      $1                           strip trailing semi
R$* < $+ :; > $*        $@ $2 :; <@>                    catch <list:;>
R$* < $* ; >               $1 < $2 >                    bogus bracketed semi

# null input now results from list:; syntax
R$@                     $@ :; <@>

# strip angle brackets -- note RFC733 heuristic to get innermost item
R$*                     $: < $1 >                       housekeeping <>
R$+ < $* >                 < $2 >                       strip excess on left
R< $* > $+                 < $1 >                       strip excess on right
R<>                     $@ < @ >                        MAIL FROM:<> case
R< $+ >                 $: $1                           remove housekeeping <>

# strip route address <@a,@b,@c:user@d> -> <user@d>
R@ $+ , $+              $2
R@ [ $* ] : $+          $2
R@ $+ : $+              $2

# find focus for list syntax
R $+ : $* ; @ $+        $@ $>Canonify2 $1 : $2 ; < @ $3 >       list syntax
R $+ : $* ;             $@ $1 : $2;                     list syntax

# find focus for @ syntax addresses
R$+ @ $+                $: $1 < @ $2 >                  focus on domain
R$+ < $+ @ $+ >         $1 $2 < @ $3 >                  move gaze right
R$+ < @ $+ >            $@ $>Canonify2 $1 < @ $2 >      already canonical


# convert old-style addresses to a domain-based address
R$- ! $+                $@ $>Canonify2 $2 < @ $1 .UUCP >        resolve uucp names
R$+ . $- ! $+           $@ $>Canonify2 $3 < @ $1 . $2 >         domain uucps
R$+ ! $+                $@ $>Canonify2 $2 < @ $1 .UUCP >        uucp subdomains

# convert node::user addresses into a domain-based address
R$- :: $+               $@ $>Canonify2 $2 < @ $1 .DECNET >      resolve DECnet names
R$- . $- :: $+          $@ $>Canonify2 $3 < @ $1.$2 .DECNET >   numeric DECnet addr

# if we have % signs, take the rightmost one
R$* % $*                $1 @ $2                         First make them all @s.
R$* @ $* @ $*           $1 % $2 @ $3                    Undo all but the last.
R$* @ $*                $@ $>Canonify2 $1 < @ $2 >      Insert < > and finish

# else we must be a local name
R$*                     $@ $>Canonify2 $1


################################################
###  Ruleset 96 -- bottom half of ruleset 3  ###
################################################

SCanonify2=96

# handle special cases for local names
R$* < @ localhost > $*          $: $1 < @ $j . > $2             no domain at all
R$* < @ localhost . $m > $*     $: $1 < @ $j . > $2             local domain
R$* < @ localhost . UUCP > $*   $: $1 < @ $j . > $2             .UUCP domain

# check for IPv4/IPv6 domain literal
R$* < @ [ $+ ] > $*             $: $1 < @@ [ $2 ] > $3          mark [addr]
R$* < @@ $=w > $*               $: $1 < @ $j . > $3             self-literal
R$* < @@ $+ > $*                $@ $1 < @ $2 > $3               canon IP addr





# if really UUCP, handle it immediately

# try UUCP traffic as a local address
R$* < @ $+ . UUCP > $*          $: $1 < @ $[ $2 $] . UUCP . > $3
R$* < @ $+ . . UUCP . > $*      $@ $1 < @ $2 . > $3

# hostnames ending in class P are always canonical
R$* < @ $* $=P > $*             $: $1 < @ $2 $3 . > $4
R$* < @ $* $~P > $*             $: $&{daemon_flags} $| $1 < @ $2 $3 > $4
R$* CC $* $| $* < @ $+.$+ > $*  $: $3 < @ $4.$5 . > $6
R$* CC $* $| $*                 $: $3
# pass to name server to make hostname canonical
R$* $| $* < @ $* > $*           $: $2 < @ $[ $3 $] > $4
R$* $| $*                       $: $2

# local host aliases and pseudo-domains are always canonical
R$* < @ $=w > $*                $: $1 < @ $2 . > $3
R$* < @ $=M > $*                $: $1 < @ $2 . > $3
R$* < @ $* . . > $*             $1 < @ $2 . > $3


##################################################
###  Ruleset 4 -- Final Output Post-rewriting  ###
##################################################
Sfinal=4

R$+ :; <@>              $@ $1 :                         handle <list:;>
R$* <@>                 $@                              handle <> and list:;

# strip trailing dot off possibly canonical name
R$* < @ $+ . > $*       $1 < @ $2 > $3

# eliminate internal code
R$* < @ *LOCAL* > $*    $1 < @ $j > $2

# externalize local domain info
R$* < $+ > $*           $1 $2 $3                        defocus
R@ $+ : @ $+ : $+       @ $1 , @ $2 : $3                <route-addr> canonical
R@ $*                   $@ @ $1                         ... and exit

# UUCP must always be presented in old form
R$+ @ $- . UUCP         $2!$1                           u@h.UUCP => h!u

# put DECnet back in :: form
R$+ @ $+ . DECNET       $2 :: $1                        u@h.DECNET => h::u
# delete duplicate local names
R$+ % $=w @ $=w         $1 @ $2                         u%host@host => u@host



##############################################################
###   Ruleset 97 -- recanonicalize and call ruleset zero   ###
###                (used for recursive calls)              ###
##############################################################

SRecurse=97
R$*                     $: $>canonify $1
R$*                     $@ $>parse $1


######################################
###   Ruleset 0 -- Parse Address   ###
######################################

Sparse=0

R$*                     $: $>Parse0 $1          initial parsing
R<@>                    $#local $: <@>          special case error msgs
R$*                     $: $>ParseLocal $1      handle local hacks
R$*                     $: $>Parse1 $1          final parsing

#
#  Parse0 -- do initial syntax checking and eliminate local addresses.
#       This should either return with the (possibly modified) input
#       or return with a #error mailer.  It should not return with a
#       #mailer other than the #error mailer.
#

SParse0
R<@>                    $@ <@>                  special case error msgs
R$* : $* ; <@>          $#error $@ 5.1.3 $: "553 List:; syntax illegal for recipient addresses"
R@ <@ $* >              < @ $1 >                catch "@@host" bogosity
R<@ $+>                 $#error $@ 5.1.3 $: "553 User address required"
R$+ <@>                 $#error $@ 5.1.3 $: "553 Hostname required"
R$*                     $: <> $1
R<> $* < @ [ $* ] : $+ > $*     $1 < @ [ $2 ] : $3 > $4
R<> $* < @ [ $* ] , $+ > $*     $1 < @ [ $2 ] , $3 > $4
R<> $* < @ [ $* ] $+ > $*       $#error $@ 5.1.2 $: "553 Invalid address"
R<> $* < @ [ $+ ] > $*          $1 < @ [ $2 ] > $3
R<> $* <$* : $* > $*    $#error $@ 5.1.3 $: "553 Colon illegal in host name part"
R<> $*                  $1
R$* < @ . $* > $*       $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* .. $* > $*   $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* @ > $*       $#error $@ 5.1.2 $: "553 Invalid route address"
R$* @ $* < @ $* > $*    $#error $@ 5.1.3 $: "553 Invalid route address"
R$* , $~O $*            $#error $@ 5.1.3 $: "553 Invalid route address"


# now delete the local info -- note $=O to find characters that cause forwarding
R$* < @ > $*            $@ $>Parse0 $>canonify $1       user@ => user
R< @ $=w . > : $*       $@ $>Parse0 $>canonify $2       @here:... -> ...
R$- < @ $=w . >         $: $(dequote $1 $) < @ $2 . >   dequote "foo"@here
R< @ $+ >               $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ $=w . >  $@ $>Parse0 $>canonify $1 $2 $3 ...@here -> ...
R$-                     $: $(dequote $1 $) < @ *LOCAL* >        dequote "foo"
R< @ *LOCAL* >          $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ *LOCAL* >
                        $@ $>Parse0 $>canonify $1 $2 $3 ...@*LOCAL* -> ...
R$* < @ *LOCAL* >       $: $1

#
#  Parse1 -- the bottom half of ruleset 0.
#

SParse1

# handle numeric address spec
R$* < @ [ $+ ] > $*     $: $>ParseLocal $1 < @ [ $2 ] > $3      numeric internet spec
R$* < @ [ $+ ] > $*     $: $1 < @ [ $2 ] : $S > $3      Add smart host to path
R$* < @ [ $+ ] : > $*           $#esmtp $@ [$2] $: $1 < @ [$2] > $3     no smarthost: send
R$* < @ [ $+ ] : $- : $*> $*    $#$3 $@ $4 $: $1 < @ [$2] > $5  smarthost with mailer
R$* < @ [ $+ ] : $+ > $*        $#esmtp $@ $3 $: $1 < @ [$2] > $4       smarthost without mailer


# short circuit local delivery so forwarded email works


R$=L < @ $=w . >        $#local $: @ $1                 special local names
R$+ < @ $=w . >         $#local $: $1                   regular local name


# resolve remotely connected UUCP links (if any)

# resolve fake top level domains by forwarding to other hosts



# pass names that still have a host to a smarthost (if defined)
R$* < @ $* > $*         $: $>MailerToTriple < $S > $1 < @ $2 > $3       glue on smarthost name

# deal with other remote names
R$* < @$* > $*          $#esmtp $@ $2 $: $1 < @ $2 > $3 user@host.domain

# handle locally delivered names
R$=L                    $#local $: @ $1         special local names
R$+                     $#local $: $1                   regular local names

###########################################################################
###   Ruleset 5 -- special rewriting after aliases have been expanded   ###
###########################################################################

SLocal_localaddr
Slocaladdr=5
R$+                     $: $1 $| $>"Local_localaddr" $1
R$+ $| $#ok             $@ $1                   no change
R$+ $| $#$*             $#$2
R$+ $| $*               $: $1




# deal with plussed users so aliases work nicely
R$+ + *                 $#local $@ $&h $: $1
R$+ + $*                $#local $@ + $2 $: $1 + *

# prepend an empty "forward host" on the front
R$+                     $: <> $1



R< > $+                 $: < > < $1 <> $&h >            nope, restore +detail

R< > < $+ <> + $* >     $: < > < $1 + $2 >              check whether +detail
R< > < $+ <> $* >       $: < > < $1 >                   else discard
R< > < $+ + $* > $*        < > < $1 > + $2 $3           find the user part
R< > < $+ > + $*        $#local $@ $2 $: @ $1           strip the extra +
R< > < $+ >             $@ $1                           no +detail
R$+                     $: $1 <> $&h                    add +detail back in

R$+ <> + $*             $: $1 + $2                      check whether +detail
R$+ <> $*               $: $1                           else discard
R< local : $* > $*      $: $>MailerToTriple < local : $1 > $2   no host extension
R< error : $* > $*      $: $>MailerToTriple < error : $1 > $2   no host extension

R< $~[ : $+ > $+        $: $>MailerToTriple < $1 : $2 > $3 < @ $2 >

R< $+ > $+              $@ $>MailerToTriple < $1 > $2 < @ $1 >


###################################################################
###  Ruleset 95 -- canonify mailer:[user@]host syntax to triple ###
###################################################################

SMailerToTriple=95
R< > $*                         $@ $1                   strip off null relay
R< error : $-.$-.$- : $+ > $*   $#error $@ $1.$2.$3 $: $4
R< error : $- : $+ > $*         $#error $@ $(dequote $1 $) $: $2
R< error : $+ > $*              $#error $: $1
R< local : $* > $*              $>CanonLocal < $1 > $2
R< $~[ : $+ @ $+ > $*<$*>$*     $# $1 $@ $3 $: $2<@$3>  use literal user
R< $~[ : $+ > $*                $# $1 $@ $2 $: $3       try qualified mailer
R< $=w > $*                     $@ $2                   delete local host
R< $+ > $*                      $#relay $@ $1 $: $2     use unqualified mailer

###################################################################
###  Ruleset CanonLocal -- canonify local: syntax               ###
###################################################################

SCanonLocal
# strip local host from routed addresses
R< $* > < @ $+ > : $+           $@ $>Recurse $3
R< $* > $+ $=O $+ < @ $+ >      $@ $>Recurse $2 $3 $4

# strip trailing dot from any host name that may appear
R< $* > $* < @ $* . >           $: < $1 > $2 < @ $3 >

# handle local: syntax -- use old user, either with or without host
R< > $* < @ $* > $*             $#local $@ $1@$2 $: $1
R< > $+                         $#local $@ $1    $: $1

# handle local:user@host syntax -- ignore host part
R< $+ @ $+ > $* < @ $* >        $: < $1 > $3 < @ $4 >

# handle local:user syntax
R< $+ > $* <@ $* > $*           $#local $@ $2@$3 $: $1
R< $+ > $*                      $#local $@ $2    $: $1

###################################################################
###  Ruleset 93 -- convert header names to masqueraded form     ###
###################################################################

SMasqHdr=93


# do not masquerade anything in class N
R$* < @ $* $=N . >      $@ $1 < @ $2 $3 . >

R$* < @ *LOCAL* >       $@ $1 < @ $j . >

###################################################################
###  Ruleset 94 -- convert envelope names to masqueraded form   ###
###################################################################

SMasqEnv=94
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2

###################################################################
###  Ruleset 98 -- local part of ruleset zero (can be null)     ###
###################################################################

SParseLocal=98




######################################################################
###  CanonAddr --       Convert an address into a standard form for
###                     relay checking.  Route address syntax is
###                     crudely converted into a %-hack address.
###
###     Parameters:
###             $1 -- full recipient address
###
###     Returns:
###             parsed address, not in source route form
######################################################################

SCanonAddr
R$*                     $: $>Parse0 $>canonify $1       make domain canonical


######################################################################
###  ParseRecipient --  Strip off hosts in $=R as well as possibly
###                     $* $=m or the access database.
###                     Check user portion for host separators.
###
###     Parameters:
###             $1 -- full recipient address
###
###     Returns:
###             parsed, non-local-relaying address
######################################################################

SParseRecipient
R$*                             $: <?> $>CanonAddr $1
R<?> $* < @ $* . >              <?> $1 < @ $2 >                 strip trailing dots
R<?> $- < @ $* >                $: <?> $(dequote $1 $) < @ $2 > dequote local part

# if no $=O character, no host in the user portion, we are done
R<?> $* $=O $* < @ $* >         $: <NO> $1 $2 $3 < @ $4>
R<?> $*                         $@ $1


R<NO> $* < @ $* $=R >           $: <RELAY> $1 < @ $2 $3 >



R<RELAY> $* < @ $* >            $@ $>ParseRecipient $1
R<$+> $*                        $@ $2


######################################################################
###  check_relay -- check hostname/address on SMTP startup
######################################################################



SLocal_check_relay
Scheck_relay
R$*                     $: $1 $| $>"Local_check_relay" $1
R$* $| $* $| $#$*       $#$3
R$* $| $* $| $*         $@ $>"Basic_check_relay" $1 $| $2

SBasic_check_relay
# check for deferred delivery mode
R$*                     $: < $&{deliveryMode} > $1
R< d > $*               $@ deferred
R< $* > $*              $: $2




######################################################################
###  check_mail -- check SMTP `MAIL FROM:' command argument
######################################################################

SLocal_check_mail
Scheck_mail
R$*                     $: $1 $| $>"Local_check_mail" $1
R$* $| $#$*             $#$2
R$* $| $*               $@ $>"Basic_check_mail" $1

SBasic_check_mail
# check for deferred delivery mode
R$*                     $: < $&{deliveryMode} > $1
R< d > $*               $@ deferred
R< $* > $*              $: $2

# authenticated?
R$*                     $: $1 $| $>"tls_client" $&{verify} $| MAIL
R$* $| $#$+             $#$2
R$* $| $*               $: $1

R<>                     $@ <OK>                 we MUST accept <> (RFC 1123)
R$+                     $: <?> $1
R<?><$+>                $: <@> <$1>
R<?>$+                  $: <@> <$1>
R$*                     $: $&{daemon_flags} $| $1
R$* f $* $| <@> < $* @ $- >     $: < ? $&{client_name} > < $3 @ $4 >
R$* u $* $| <@> < $* >  $: <?> < $3 >
R$* $| $*               $: $2
# handle case of @localhost on address
R<@> < $* @ localhost > $: < ? $&{client_name} > < $1 @ localhost >
R<@> < $* @ [127.0.0.1] >
                        $: < ? $&{client_name} > < $1 @ [127.0.0.1] >
R<@> < $* @ localhost.$m >
                        $: < ? $&{client_name} > < $1 @ localhost.$m >
R<@> < $* @ localhost.localdomain >
                        $: < ? $&{client_name} > < $1 @ localhost.localdomain >
R<@> < $* @ localhost.UUCP >
                        $: < ? $&{client_name} > < $1 @ localhost.UUCP >
R<@> $*                 $: $1                   no localhost as domain
R<? $=w> $*             $: $2                   local client: ok
R<? $+> <$+>            $#error $@ 5.5.4 $: "553 Real domain name required for sender address"
R<?> $*                 $: $1
R$*                     $: <?> $>CanonAddr $1           canonify sender address and mark it
R<?> $* < @ $+ . >      <?> $1 < @ $2 >                 strip trailing dots
# handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
R<?> $* < @ $* $=P >    $: <OKR> $1 < @ $2 $3 >
R<?> $* < @ $j >        $: <OKR> $1 < @ $j >
R<?> $* < @ $+ >        $: <? $(resolve $2 $: $2 <PERM> $) > $1 < @ $2 >
R<? $* <$->> $* < @ $+ >
                        $: <$2> $3 < @ $4 >


# handle case of no @domain on address
R<?> $*                 $: $&{daemon_flags} $| <?> $1
R$* u $* $| <?> $*      $: <OKR> $3
R$* $| $*               $: $2
R<?> $*                 $: < ? $&{client_addr} > $1
R<?> $*                 $@ <OKR>                        ...local unqualed ok
R<? $+> $*              $#error $@ 5.5.4 $: "553 Domain name required for sender address " $&f
                                                        ...remote is not
# check results
R<?> $*                 $: @ $1         mark address: nothing known about it
R<$={ResOk}> $*         $: @ $2         domain ok
R<TEMP> $*              $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
R<PERM> $*              $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"



######################################################################
###  check_rcpt -- check SMTP `RCPT TO:' command argument
######################################################################

SLocal_check_rcpt
Scheck_rcpt
R$*                     $: $1 $| $>"Local_check_rcpt" $1
R$* $| $#$*             $#$2
R$* $| $*               $@ $>"Basic_check_rcpt" $1

SBasic_check_rcpt
# empty address?
R<>                     $#error $@ nouser $: "553 User address required"
R$@                     $#error $@ nouser $: "553 User address required"
# check for deferred delivery mode
R$*                     $: < $&{deliveryMode} > $1
R< d > $*               $@ deferred
R< $* > $*              $: $2


######################################################################
R$*                     $: $1 $| @ $>"Rcpt_ok" $1
R$* $| @ $#TEMP $+      $: $1 $| T $2
R$* $| @ $#$*           $#$2
R$* $| @ RELAY          $@ RELAY
R$* $| @ $*             $: O $| $>"Relay_ok" $1
R$* $| T $+             $: T $2 $| $>"Relay_ok" $1
R$* $| $#TEMP $+        $#error $2
R$* $| $#$*             $#$2
R$* $| RELAY            $@ RELAY
R T $+ $| $*            $#error $1
# anything else is bogus
R$*                     $#error $@ 5.7.1 $: "550 Relaying denied"


######################################################################
### Rcpt_ok: is the recipient ok?
######################################################################
SRcpt_ok
R$*                     $: $>ParseRecipient $1          strip relayable hosts




# authenticated via TLS?
R$*                     $: $1 $| $>RelayTLS     client authenticated?
R$* $| $# $+            $# $2                   error/ok?
R$* $| $*               $: $1                   no

R$*                     $: $1 $| $>"Local_Relay_Auth" $&{auth_type}
R$* $| $# $*            $# $2
R$* $| NO               $: $1
R$* $| $*               $: $1 $| $&{auth_type}
R$* $|                  $: $1
R$* $| $={TrustAuthMech}        $# RELAY
R$* $| $*               $: $1
# anything terminating locally is ok
R$+ < @ $=w >           $@ RELAY
R$+ < @ $* $=R >        $@ RELAY




# check for local user (i.e. unqualified address)
R$*                     $: <?> $1
R<?> $* < @ $+ >        $: <REMOTE> $1 < @ $2 >
# local user is ok
R<?> $+                 $@ RELAY
R<$+> $*                $: $2

######################################################################
### Relay_ok: is the relay/sender ok?
######################################################################
SRelay_ok
# anything originating locally is ok
# check IP address
R$*                     $: $&{client_addr}
R$@                     $@ RELAY                originated locally
R0                      $@ RELAY                originated locally
R127.0.0.1              $@ RELAY                originated locally
RIPv6:::1               $@ RELAY                originated locally
R$=R $*                 $@ RELAY                relayable IP address
R$*                     $: [ $1 ]               put brackets around it...
R$=w                    $@ RELAY                ... and see if it is local


# check client name: first: did it resolve?
R$*                     $: < $&{client_resolve} >
R<TEMP>                 $#TEMP $@ 4.4.0 $: "450 Relaying temporarily denied. Cannot resolve PTR record for " $&{client_addr}
R<FORGED>               $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
R<FAIL>                 $#error $@ 5.7.1 $: "550 Relaying denied. IP name lookup failed " $&{client_name}
R$*                     $: <@> $&{client_name}
# pass to name server to make hostname canonical
R<@> $* $=P             $:<?>  $1 $2
R<@> $+                 $:<?>  $[ $1 $]
R$* .                   $1                      strip trailing dots
R<?> $=w                $@ RELAY
R<?> $* $=R                     $@ RELAY





######################################################################
###  trust_auth: is user trusted to authenticate as someone else?
###
###     Parameters:
###             $1: AUTH= parameter from MAIL command
######################################################################

SLocal_trust_auth
Strust_auth
R$*                     $: $&{auth_type} $| $1
# required by RFC 2554 section 4.
R$@ $| $*               $#error $@ 5.7.1 $: "550 not authenticated"
R$* $| $&{auth_authen}          $@ identical
R$* $| <$&{auth_authen}>        $@ identical
R$* $| $*               $: $1 $| $>"Local_trust_auth" $2
R$* $| $#$*             $#$2
R$*                     $#error $@ 5.7.1 $: "550 " $&{auth_authen} " not allowed to act as " $&{auth_author}

######################################################################
###  Relay_Auth: allow relaying based on authentication?
###
###     Parameters:
###             $1: ${auth_type}
######################################################################
SLocal_Relay_Auth

######################################################################
###  srv_features: which features to offer to a client?
###     (done in server)
######################################################################
Ssrv_features


######################################################################
###  try_tls: try to use STARTTLS?
###     (done in client)
######################################################################
Stry_tls


######################################################################
###  tls_rcpt: is connection with server "good" enough?
###     (done in client, per recipient)
###
###     Parameters:
###             $1: recipient
######################################################################
Stls_rcpt


######################################################################
###  tls_client: is connection with client "good" enough?
###     (done in server)
###
###     Parameters:
###             ${verify} $| (MAIL|STARTTLS)
######################################################################
Stls_client
R$* $| $*       $@ $>"TLS_connection" $1

######################################################################
###  tls_server: is connection with server "good" enough?
###     (done in client)
###
###     Parameter:
###             ${verify}
######################################################################
Stls_server
R$*             $@ $>"TLS_connection" $1

######################################################################
###  TLS_connection: is TLS connection "good" enough?
###
###     Parameters:
###             ${verify}
###             Requirement: RHS from access map, may be ? for none.
######################################################################
STLS_connection
RSOFTWARE       $#error $@ 4.7.0 $: "403 TLS handshake."


######################################################################
###  RelayTLS: allow relaying based on TLS authentication
###
###     Parameters:
###             none
######################################################################
SRelayTLS
# authenticated?

######################################################################
###  authinfo: lookup authinfo in the access map
###
###     Parameters:
###             $1: {server_name}
###             $2: {server_addr}
######################################################################
Sauthinfo








SLocal_localaddr
R$+                     $: $>ParseRecipient $1
R$* < @ $+ > $*         $#relay $@ ${MTAHost} $: $1 < @ $2 > $3
# DECnet
R$+ :: $+               $#relay $@ ${MTAHost} $: $1 :: $2
R$*                     $#relay $@ ${MTAHost} $: $1 < @ $j >
#
######################################################################
######################################################################
#####
#####                   MAIL FILTER DEFINITIONS
#####
######################################################################
######################################################################

#
######################################################################
######################################################################
#####
#####                   MAILER DEFINITIONS
#####
######################################################################
######################################################################


##################################################
###   Local and Program Mailer specification   ###
##################################################

#####  $Id: local.m4,v 8.59 2004/11/23 00:37:25 ca Exp $  #####

#
#  Envelope sender rewriting
#
SEnvFromL
R<@>                    $n                      errors to mailer-daemon
R@ <@ $*>               $n                      temporarily bypass Sun bogosity
R$+                     $: $>AddDomain $1       add local domain if needed
R$*                     $: $>MasqEnv $1         do masquerading

#
#  Envelope recipient rewriting
#
SEnvToL
R$+ < @ $* >            $: $1                   strip host part
R$+ + $*                $: < $&{addr_type} > $1 + $2    mark with addr type
R<e s> $+ + $*          $: $1                   remove +detail for sender
R< $* > $+              $: $2                   else remove mark

#
#  Header sender rewriting
#
SHdrFromL
R<@>                    $n                      errors to mailer-daemon
R@ <@ $*>               $n                      temporarily bypass Sun bogosity
R$+                     $: $>AddDomain $1       add local domain if needed
R$*                     $: $>MasqHdr $1         do masquerading

#
#  Header recipient rewriting
#
SHdrToL
R$+                     $: $>AddDomain $1       add local domain if needed
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2

#
#  Common code to add local domain name (only if always-add-domain)
#
SAddDomain

Mlocal,         P=[IPC], F=lmDFMuXkw5, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL,
                T=DNS/RFC822/SMTP,
                A=TCP $h
Mprog,          P=[IPC], F=lmDFMuXk5, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
                T=X-Unix/X-Unix/X-Unix,
                A=TCP $h

#####################################
###   SMTP Mailer specification   ###
#####################################

#####  $Id: smtp.m4,v 8.65 2006/07/12 21:08:10 ca Exp $  #####

#
#  common sender and masquerading recipient rewriting
#
SMasqSMTP
R$* < @ $* > $*         $@ $1 < @ $2 > $3               already fully qualified
R$+                     $@ $1 < @ *LOCAL* >             add local qualification

#
#  convert pseudo-domain addresses to real domain addresses
#
SPseudoToReal

# pass <route-addr>s through
R< @ $+ > $*            $@ < @ $1 > $2                  resolve <route-addr>

# output fake domains as user%fake@relay

# do UUCP heuristics; note that these are shared with UUCP mailers
R$+ < @ $+ .UUCP. >     $: < $2 ! > $1                  convert to UUCP form
R$+ < @ $* > $*         $@ $1 < @ $2 > $3               not UUCP form

# leave these in .UUCP form to avoid further tampering
R< $&h ! > $- ! $+      $@ $2 < @ $1 .UUCP. >
R< $&h ! > $-.$+ ! $+   $@ $3 < @ $1.$2 >
R< $&h ! > $+           $@ $1 < @ $&h .UUCP. >
R< $+ ! > $+            $: $1 ! $2 < @ $Y >             use UUCP_RELAY
R$+ < @ $~[ $* : $+ >   $@ $1 < @ $4 >                  strip mailer: part
R$+ < @ >               $: $1 < @ *LOCAL* >             if no UUCP_RELAY


#
#  envelope sender rewriting
#
SEnvFromSMTP
R$+                     $: $>PseudoToReal $1            sender/recipient common
R$* :; <@>              $@                              list:; special case
R$*                     $: $>MasqSMTP $1                qualify unqual'ed names
R$+                     $: $>MasqEnv $1                 do masquerading


#
#  envelope recipient rewriting --
#  also header recipient if not masquerading recipients
#
SEnvToSMTP
R$+                     $: $>PseudoToReal $1            sender/recipient common
R$+                     $: $>MasqSMTP $1                qualify unqual'ed names
R$* < @ *LOCAL* > $*    $: $1 < @ $j . > $2

#
#  header sender and masquerading header recipient rewriting
#
SHdrFromSMTP
R$+                     $: $>PseudoToReal $1            sender/recipient common
R:; <@>                 $@                              list:; special case

# do special header rewriting
R$* <@> $*              $@ $1 <@> $2                    pass null host through
R< @ $* > $*            $@ < @ $1 > $2                  pass route-addr through
R$*                     $: $>MasqSMTP $1                qualify unqual'ed names
R$+                     $: $>MasqHdr $1                 do masquerading


#
#  relay mailer header masquerading recipient rewriting
#
SMasqRelay
R$+                     $: $>MasqSMTP $1
R$+                     $: $>MasqHdr $1

Msmtp,          P=[IPC], F=mDFMuXk5, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
                T=DNS/RFC822/SMTP,
                A=TCP $h
Mesmtp,         P=[IPC], F=mDFMuXak5, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
                T=DNS/RFC822/SMTP,
                A=TCP $h
Msmtp8,         P=[IPC], F=mDFMuX8k5, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
                T=DNS/RFC822/SMTP,
                A=TCP $h
Mdsmtp,         P=[IPC], F=mDFMuXa%k5, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
                T=DNS/RFC822/SMTP,
                A=TCP $h
Mrelay,         P=[IPC], F=mDFMuXa8k, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=\r\n, L=2040,
                T=DNS/RFC822/SMTP,
                A=TCP $h

### submit.mc ###
# divert(-1)
# #
# # Copyright (c) 2001-2003 Sendmail, Inc. and its suppliers.
# #     All rights reserved.
# #
# # By using this file, you agree to the terms and conditions set
# # forth in the LICENSE file which can be found at the top level of
# # the sendmail distribution.
# #
# #
# 
# #
# #  This is the prototype file for a set-group-ID sm-msp sendmail that
# #  acts as a initial mail submission program.
# #
# 
# divert(0)dnl
# sinclude(`/usr/share/sendmail-cf/m4/cf.m4')dnl
# VERSIONID(`linux setup')dnl
# define(`confCF_VERSION', `Submit')dnl
# define(`__OSTYPE__',`')dnl dirty hack to keep proto.m4 from complaining
# define(`_USE_DECNET_SYNTAX_', `1')dnl support DECnet
# define(`confTIME_ZONE', `USE_TZ')dnl
# define(`confDONT_INIT_GROUPS', `True')dnl
# define(`confPID_FILE', `/var/run/sm-client.pid')dnl
# dnl define(`confDIRECT_SUBMISSION_MODIFIERS',`C')dnl
# FEATURE(`use_ct_file')dnl
# dnl
# dnl If you use IPv6 only, change [127.0.0.1] to [IPv6:::1]
# FEATURE(`msp', `[127.0.0.1]')dnl