Subversion Repositories configs

# artec_eplus48u - SANE Backend configuration file

# This section is for use with the Artec E+ 48U scanner
# This scanner is also sold as
# Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394
# This sections contains verbose description of each option.
# For other scanners, see below.
#
# The USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
usb 0x05d8 0x4003

# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb

# Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes
option ePlusPro   0

# for adjusting the default gamma values
option redGamma         1.0
option greenGamma       1.0
option blueGamma        1.0
option masterGamma      1.9

#Use this options to set the default offset and exposure time values.
option redOffset        0x28
option greenOffset      0x2f
option blueOffset       0x2f
option redExposure      0xa7
option greenExposure    0x116
option blueExposure     0xdc

# The vendor and model string
# This string is displayed by the frontends. If you do not want to get your
# scanner reported as "Artec E+ 48U", then change the option accordingly.
option vendorString "Artec"
option modelString "E+ 48U"

# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).
#If you are using libusb, a device looks like this:
#device libusb:001:002
#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usbscanner

# ----------------------------------------------------------------------------

# Since the Trust Easy Webscan 19200 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4006
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Trust"
option modelString "Easy Webscan 19200"

# ----------------------------------------------------------------------------

# Since the Memorex Mem48U uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4005
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Memorex"
option modelString "MEM 48U"

# ----------------------------------------------------------------------------

# Since the Trust 240H Easy Webscan Gold uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4007
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option ePlusPro         1
option vendorString "Trust"
option modelString "240H Easy Webscan Gold"

# ----------------------------------------------------------------------------

# Since the UMAX AstraSlim SE uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4009
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "UMAX"
option modelString "AstraSlim SE"

# ----------------------------------------------------------------------------

# This section is for the Artec E+ Pro
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4004
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option ePlusPro   1
option vendorString "Artec"
option modelString "E+ Pro"

# ----------------------------------------------------------------------------

# This section is for the UMAX AstraSlim 1200 SE
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4010
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option vendorString "UMAX"
option modelString "AstraSlim 1200 SE"

# ----------------------------------------------------------------------------

# Since the Yakumo Scan50 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4011
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Yakumo"
option modelString "Scan50"