Subversion Repositories configs

#!/bin/bash
# Network Interface Configuration System
# Copyright (c) 1996-2013 Red Hat, Inc. all rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License, version 2,
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

. /etc/init.d/functions

cd /etc/sysconfig/network-scripts
. ./network-functions

[ -f ../network ] && . ../network

CONFIG="${1}"

need_config "${CONFIG}"

source_config

# Allow the user to override the detection of our physical device by passing
# it in.  No checking is done, if the user gives us a bogus dev, it's
# their problem.
[ -n "${PHYSDEV}" ] && REALDEVICE="$PHYSDEV"

if [ "${BOOTPROTO}" = "dhcp" ]; then
    DYNCONFIG=true
fi

# load the module associated with that device
# /sbin/modprobe ${REALDEVICE}
is_available ${REALDEVICE}

# remap, if the device is bound with a MAC address and not the right device num
# bail out, if the MAC does not fit
if [ -n "${HWADDR}" ]; then
    HWADDR=$(echo $HWADDR | tail -c 24)
    FOUNDMACADDR=`get_hwaddr ${REALDEVICE} | tail -c 24`
    if [ "${FOUNDMACADDR}" != "${HWADDR}" ]; then
        curdev=`get_device_by_hwaddr ${HWADDR}`
        if [ -n "$curdev" ]; then
            ip link set dev "$curdev" name "${REALDEVICE}" || {
            net_log $"Device ${DEVICE} has different MAC address than expected, ignoring."
            exit 1
          }
        fi
    fi
fi

# now check the real state
is_available ${REALDEVICE} || {
      if [ -n "$alias" ]; then
         net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
      else
         net_log $"Device ${DEVICE} does not seem to be present, delaying initialization."
      fi
      exit 1
}

# if we are a P_Key device, create the device if needed
if [ "${PKEY}" = yes ]; then
        [ -z "${PKEY_ID}" ] && {
                net_log $"InfiniBand IPoIB device: PKEY=yes requires a PKEY_ID"
                exit 1
        }
        [ -z "${PHYSDEV}" ] && {
                net_log $"InfiniBand IPoIB device: PKEY=yes requires a PHYSDEV"
                exit 1
        }
        # Normalize our PKEY_ID to have the high bit set
        NEW_PKEY_ID=`printf "0x%04x" $(( 0x8000 | ${PKEY_ID} ))`
        NEW_PKEY_NAME=`printf "%04x" ${NEW_PKEY_ID}`
        [ "${DEVICE}" != "${PHYSDEV}.${NEW_PKEY_NAME}" ] && {
                net_log $"Configured DEVICE name does not match what new device name would be.  This
is most likely because once the PKEY_ID was normalized, it no longer
resulted in the expected device naming, and so the DEVICE entry in the
config file needs to be updated to match. This can also be caused by
giving PKEY_ID as a hex number but without using the mandatory 0x prefix.
        Configured DEVICE=$DEVICE
        Configured PHYSDEV=$PHYSDEV
        Configured PKEY_ID=$PKEY_ID
        Calculated PKEY_ID=$NEW_PKEY_ID
        Calculated name=${PHYSDEV}.${NEW_PKEY_NAME}"
                exit 1
        }
        [ -d "/sys/class/net/${DEVICE}" ] ||
                echo "${NEW_PKEY_ID}" > "/sys/class/net/${PHYSDEV}/create_child"
        [ -d "/sys/class/net/${DEVICE}" ] || {
                echo "Failed to create child device $NEW_PKEY_ID of $PHYSDEV"
                exit 1
        }
        # When we get to setting up the IP address, we need REALDEVICE to
        # point to our new PKEY device
        REALDEVICE="${DEVICE}"
fi


if [ -n "${MACADDR}" ]; then
    net_log $"IPoIB devices do not support setting the MAC address of the interface"
    # ip link set dev ${DEVICE} address ${MACADDR}
fi

# First, do we even support setting connected mode?
if [ -e /sys/class/net/${DEVICE}/mode ]; then
    # OK, set the mode in all cases, that way it gets reset on a down/up
    # cycle, allowing people to change the mode without rebooting
    if [ "${CONNECTED_MODE}" = yes ]; then
        echo connected > /sys/class/net/${DEVICE}/mode
        # cap the MTU where we should based upon mode
        [ -z "$MTU" ] && MTU=65520
        [ "$MTU" -gt 65520 ] && MTU=65520
    else
        echo datagram > /sys/class/net/${DEVICE}/mode
        # cap the MTU where we should based upon mode
        [ -z "$MTU" ] && MTU=4092
        [ "$MTU" -gt 4092 ] && MTU=4092
    fi
fi

if [ -n "${MTU}" ]; then
    ip link set dev ${DEVICE} mtu ${MTU}
fi

# slave device?
if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
    install_bonding_driver ${MASTER}
    grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || {
        /sbin/ip link set dev ${DEVICE} down
        echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
    }
    ethtool_set

    exit 0
fi

# Bonding initialization. For DHCP, we need to enslave the devices early,
# so it can actually get an IP.
if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then
    install_bonding_driver ${DEVICE}
    /sbin/ip link set dev ${DEVICE} up
    for device in $(LANG=C grep -l "^[[:space:]]*MASTER=\"\?${DEVICE}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do
            is_ignored_file "$device" && continue
            /sbin/ifup ${device##*/}
    done

    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}

    # add the bits to setup the needed post enslavement parameters
    for arg in $BONDING_OPTS ; do   
        key=${arg%%=*};
        value=${arg##*=};
        if [ "${key}" = "primary" ]; then 
            echo $value > /sys/class/net/${DEVICE}/bonding/$key
        fi
    done
fi

                     
if [ -n "${DYNCONFIG}" -a -x /sbin/dhclient ]; then
    # Remove any temporary references which were previously added to dhclient config
    if [ -w /etc/dhclient-${DEVICE}.conf ] ; then
        LC_ALL=C grep -v "# temporary RHL ifup addition" /etc/dhclient-${DEVICE}.conf > /etc/dhclient-${DEVICE}.conf.ifupnew 2> /dev/null
        cat /etc/dhclient-${DEVICE}.conf.ifupnew > /etc/dhclient-${DEVICE}.conf
        rm -f /etc/dhclient-${DEVICE}.conf.ifupnew
    fi
    if [[ "${PERSISTENT_DHCLIENT}" =  [yY1]* ]]; then
       ONESHOT="";
    else
       ONESHOT="-1";
    fi;
    if [ -n "${DHCP_HOSTNAME}" ]; then
       # Send a host-name to the DHCP server (requ. by some dhcp servers).
       if [ -w /etc/dhclient-${DEVICE}.conf ] ; then
           if ! LC_ALL=C grep "send *host-name *\"${DHCP_HOSTNAME}\"" /etc/dhclient-${DEVICE}.conf > /dev/null 2>&1 ; then
               echo "send host-name \"${DHCP_HOSTNAME}\";  # temporary RHL ifup addition" >> /etc/dhclient-${DEVICE}.conf
           fi
       elif ! [ -e /etc/dhclient-${DEVICE}.conf ] ; then
           echo "send host-name \"${DHCP_HOSTNAME}\";  # temporary RHL ifup addition" >> /etc/dhclient-${DEVICE}.conf
       fi
    fi
    # allow users to use generic '/etc/dhclient.conf' (as documented in manpage!) 
    # if per-device file doesn't exist or is empty
    if [ -s /etc/dhclient-${DEVICE}.conf ]; then
       DHCLIENTCONF="-cf /etc/dhclient-${DEVICE}.conf";
    else
       DHCLIENTCONF='';
    fi;
    # copy any lease obtained by the initrd
    if [ -f /dev/.dhclient-${DEVICE}.leases ] ; then
        mv -f /dev/.dhclient-${DEVICE}.leases /var/lib/dhclient/dhclient-${DEVICE}.leases
        [ -x /sbin/restorecon ] && restorecon /var/lib/dhclient/dhclient-${DEVICE}.leases > /dev/null 2>&1
    fi
    DHCLIENTARGS="${DHCLIENTARGS} ${ONESHOT} -q ${DHCLIENTCONF} -lf /var/lib/dhclient/dhclient-${DEVICE}.leases -pf /var/run/dhclient-${DEVICE}.pid"
    echo
    echo -n $"Determining IP information for ${DEVICE}..."
    if check_link_down ${DEVICE}; then
        echo $" failed; no link present.  Check cable?"
        ip link set dev ${DEVICE} down >/dev/null 2>&1
        exit 1
    fi

    ethtool_set

    if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then
        echo $" done."
        dhcpipv4="good"
    else
        echo $" failed."
        if [[ "${IPV4_FAILURE_FATAL}"  = [Yy1]* ]] ; then
            exit 1
        fi
        if [[ "$IPV6INIT" != [yY1]* && "$DHCPV6C" != [yY1]* ]] ; then
            exit 1
        fi
        net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning
    fi
# end dynamic device configuration
else 
    if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then
         # enable device without IP, useful for e.g. PPPoE
         ip link set dev ${REALDEVICE} up
         ethtool_set
         [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
    else
  
    expand_config

    [ -n "${ARP}" ] && \
        ip link set dev ${REALDEVICE} $(toggle_value arp $ARP)
   
    if ! ip link set dev ${REALDEVICE} up ; then
        net_log $"Failed to bring up ${DEVICE}."
        exit 1
    fi

    ethtool_set

    [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}

    if [ "${DEVICE}" = "lo" ]; then
        SCOPE="scope host"
    else
        SCOPE=${SCOPE:-}
    fi
    
    if [ -n "$SRCADDR" ]; then
       SRC="src $SRCADDR"
    else
       SRC=
    fi
    
    # set IP address(es)
    for idx in {0..256} ; do
        if [ -z "${ipaddr[$idx]}" ]; then
            break
        fi

        if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
            [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] && \
            /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]}
            if [ $? = 1 ]; then
                net_log $"Error, some other host already uses address ${ipaddr[$idx]}."
                exit 1
            fi
           
            if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
                brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
                net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
            fi
        fi 
    
        if [ -n "$SRCADDR" ]; then
           sysctl -w "net.ipv4.conf.${REALDEVICE}.arp_filter=1" >/dev/null 2>&1
        fi

        # update ARP cache of neighboring computers
        if [ "${REALDEVICE}" != "lo" ]; then
            /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]}
            ( sleep 2;
              /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null &
        fi
    done

    # Set a default route.
    if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then
        # set up default gateway. replace if one already exists
        if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
            ip route replace default ${METRIC:+metric $METRIC} \
                via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \
                ${GATEWAYDEV:+dev $GATEWAYDEV} ||
                        net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}."
        elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then
            ip route replace default ${METRIC:+metric $METRIC} \
                ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} ||
                        net_log $"Erorr adding default gateway for ${REALDEVICE}."
        fi
    fi
    fi
fi

# Add Zeroconf route.
if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
    ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link
fi

# IPv6 initialisation?
if [ "${NETWORKING_IPV6}" = "yes" ]; then
    /etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
    if [[ "${DHCPV6C}"  = [Yy1]* ]] && [ -x /sbin/dhcp6c ]; then
        /sbin/dhcp6c ${DEVICE};
        dhcp6_pid=(`/bin/ps -eo 'pid,args' | /bin/grep "dhcp6c ${DEVICE}" | egrep -v grep`);
        echo ${dhcp6_pid[0]} > /var/run/dhcp6c_${DEVICE}.pid
    fi;
fi

exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2}