Rev 175 | Blame | Compare with Previous | Last modification | View Log | RSS feed
# Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet1.## This file was automatically generated by the VMware configuration program.# See Instructions below if you want to modify it.## We set domain-name-servers to make some DHCP clients happy# (dhclient as configured in SuSE, TurboLinux, etc.).# We also supply a domain name to make pump (Red Hat 6.x) happy.####### VMNET DHCP Configuration. Start of "DO NOT MODIFY SECTION" ###### Modification Instructions: This section of the configuration file contains# information generated by the configuration program. Do not modify this# section.# You are free to modify everything else. Also, this section must start# on a new line# This file will get backed up with a different name in the same directory# if this section is edited and you try to configure DHCP again.# Written at: 06/11/2020 12:22:11allow unknown-clients;default-lease-time 1800; # default is 30 minutesmax-lease-time 7200; # default is 2 hourssubnet 192.168.103.0 netmask 255.255.255.0 {range 192.168.103.128 192.168.103.254;option broadcast-address 192.168.103.255;option domain-name-servers 192.168.103.1;option domain-name localdomain;default-lease-time 1800; # default is 30 minutesmax-lease-time 7200; # default is 2 hours}host vmnet1 {hardware ethernet 00:50:56:C0:00:01;fixed-address 192.168.103.1;option domain-name-servers 0.0.0.0;option domain-name "";}####### VMNET DHCP Configuration. End of "DO NOT MODIFY SECTION" #######